Engineer Khan's Backup OpenAR-P E2 for Spark 7111-30-01-2014

[engineerkhan15]

Mates:

Here is my latest backup of OpenAR-P Enigma2 Image for Spark 7111 Receivers. It is based upon latest release of OpenAR-P Enigma2 Image, OpenAR-P_OE2.0_211_alien_epl3-git-20-01-14_v2013-03-31-540-gb01d455. All credit goes to the OpenAR-P team for their hard work.

Cams:
1. CCcam
2. Mgcamd
3. Oscam (Oscam ymod v18t48 )
4. Camd3

Plugins:
1. MediaPortal 5.0.6
2. CoolTV Guide 6.4.0
3. EPG Translator
4. Wikipedia
5. IPTV List Updater
6. HDD Manager
7. MyTubePlayer

Extra Skins Installed:
1. dTV-Reloaded HD (mod engineerkhan15)
2. dreamTV-HD (mod engineerkhan15)
3. DreamMM-HD (mod engineerkhan15)
4. nBlack51

Picons:
About 3000 picons of Hotbird (13E), Asiasat 3S (105.5E), DishTV SD (95E) and Intelsat 20 (68.5E) included. (size=100x60)

How to install:
1. Only use Spark plugin "e2_upgrade" to install this backup successfully.
2. Extract it and copy "back_of_e2" folder on a USB Flash Disk.
3. Connect USB Flash Disk to your Spark receiver while the receiver is running in Spark.
4. Go to Menu>Plugin and start e2_upgrade" plugin.
5. Press OK button on remote, scroll down to "back_of_e2" folder and press RED button to select it.
6. Press RED button again to start installing this backup. After some time installation will be completed.

How to Boot into Enigma2:
1. To boot into your new Enigma2 image, power off your receiver from back side power switch.
2. Now, while keeping pressed the front panel OK button on your receiver, power on again your receiver using back side power switch, after few seconds, you will see "Forc" on your receiver display.
3. Leave OK button now and press channel down button on your receiver's front panel, you will see "En16" on your receiver display.
4. Now press OK button and receiver will boot into Enigma2 image.

FTP and Telnet Login Details:
User: root
Password: root

Screenshots:

dreamTV-HD Skin:


dTV Reloaded-HD Skin:


DreamMM-HD Skin:


Plugins-1:


Plugins-2:


EPG Translator:


Wikipedia:


Picons:


Download from here:

Engineer Khan's Backup of OpenAR-P Enigma2 for Spark 7111 - 30-01-2014.rar

If you like this post, press thanks button.

[jackvar]

7162 ka bhi dhena.....................

[engineerkhan15]

Bhai, I don't have 7162 receiver, so cannot provide backup of that receiver.

[SPARK]

:salam:

Thanks A Lot Enigneer Bro, kindly confirm how to hide radio channels? and also how to scan a single satellite' channels without deleting already stored satellite channels ?

[SPARK]

:salam:

Brother your this enigma image why does not support 1080P 60htz (Full HD)

[engineerkhan15]

Brother,
Here are answers to your questions:
1. If you want to hide radio channels from channel lists then you will have to use "Dreamset" software to edit channel lists or delete radio channels from all user lists.
2. For scanning single satellite, Go to Menu>Setup>Service searching and select "single satellite" in "scan type" and select the satellite you want to scan but that satellite must be added in your "Tuner configuration" settings first.
3. Since this is a backup of OpenAR-P Image and OpenAR-P Image does not support 1080p 60Hz at the moment, so this backup also not supports that resolution. You may use 1080i 50Hz, 1080i 60Hz or 1080p 50Hz (whichever suits you the most), all these are also FULL HD resolutions.