Engineer Khan's Backup OpenAR Enigma2 4 Spark7111 -4-12-2013

[engineerkhan15]

Brothers,
Here is my latest backup of OpenAR-P Enigma2 Image for Spark 7111 Receivers. It is based upon OpenAR-P Enigma2 Image of 25 November 2013.

Main Features:
1. Latest Satellite XML file of 4 December 2013include all satellites between 7 West to 122 East. Ku band and C Band on same position are included as separate satellites.
2. Softcams including CCcam, Mgcamd, Oscam, Camd3, Wiccard, CS2GBox, GBox, Incubuscamd, MultiCS & SBox are installed.
3. Latest Plugins including, MediaPortal 4.92, , CoolTV Guide 6.4.0, DD Subtitle Player 3.27, HDD Manager and MyTubePlayer installed. Recording on USB HDD possible using HDD Manager plugin. Many more plugins may be installed from built-in server.
5. It is possible now to grab screenshots with video.
4. Fully compatible with android applications like "Dreamdroid" and "Vu+ Player". Watching channels on android through "Vu+ Payer" streaming is possible.
6. New boot logo added. "Magic", "nBlack51" and "dTV-Reloaded HD" skins installed, more can be installed from built-in server. Keymap used is "Amiko" but it may be changed to "standard e2" by going to Menu>Setup>System>Key Map.

How to install:
1. Only use Spark plugin "e2_upgrade" to install this backup successfully.
2. Extract it and copy "back_of_e2" folder on a USB Flash Disk.
3. Connect USB Flash Disk to your Spark receiver while the receiver is running in Spark.
4. Go to Menu>Plugin and start e2_upgrade" plugin.
5. Press OK button on remote, scroll down to "back_of_e2" folder and press RED button to select it.
6. Press RED button again to start installing this backup. After some time installation will be completed.

How to Boot into Enigma2:
1. To boot into your new Enigma2 image, power off your receiver from back side power switch.
2. Now, while keeping pressed the front panel OK button on your receiver, power on again your receiver using back side power switch, after few seconds, you will see "Forc" on your receiver display.
3. Leave OK button now and press channel down button on your receiver's front panel, you will see "En16" on your receiver display.
4. Now press OK button and receiver will boot into Enigma2 image.

FTP Login details:
User: root
Password: root

Download from here:

Engineer Khan's Backup of OpenAR-P Enigma2 for Spark 7111 - 04-12-2013.rar

File password: engineerkhan15

[umair05]

i installed this new backup
since i m using scart so not getting video
i used V.format button but mode didnt change.
please press v.format button yourself and check whether a menu opens or not.
i think menu is opening by pressing v.format button of remote control and then one have to use colured buttons to change video format.
if u cannot do this then send raw image in which software applies each format one by one.

[kami2k]

Dont use scart use a/v

[engineerkhan15]

i installed this new backup
since i m using scart so not getting video
i used V.format button but mode didnt change.
please press v.format button yourself and check whether a menu opens or not.
i think menu is opening by pressing v.format button of remote control and then one have to use colured buttons to change video format.
if u cannot do this then send raw image in which software applies each format one by one.

https://drive.google.com/file/d/0BxND9J ... sp=sharing

[umair05]

i installed this new backup
since i m using scart so not getting video
i used V.format button but mode didnt change.
please press v.format button yourself and check whether a menu opens or not.
i think menu is opening by pressing v.format button of remote control and then one have to use colured buttons to change video format.
if u cannot do this then send raw image in which software applies each format one by one.

https://drive.google.com/file/d/0BxND9J ... sp=sharing

i installed this raw image by plugin_e2upgrade of spark
when moved to E2 section then nothing is happening except LOAD display on panel of stb ?

[engineerkhan15]

This is fresh Image for Spark 7111 from OpenAR Team. If this is not working on your receiver then may be it is not compatible to your receiver.

[umair05]

This is fresh Image for Spark 7111 from OpenAR Team. If this is not working on your receiver then may be it is not compatible to your receiver.

no no
all 7111 image are ok in my spark startrack 2020
there is image file uploading problem ?

[engineerkhan15]

Brother,
Then you may try installing once again. May be in second try, it works.

[=SAJID IQBAL=]

Good Work Bro

[irfanbhangwar]

dear your buckup is very good tuner is very pawerfull and plz add tspannel in your backup