Starsat 2000 Extreme my new box

[masifh]

[I Did The Following Trick

-I Installed V2.12 First Of All
-After That did A Factory Default (All)
-After Doing The Factory Default I Instantly Tuned Dish TV HD (Need To Check Whether Forever Server Is Active Or Not)
-If Dish TV HD Is Now Not Doing Signal Loss And Opens In 15 Sec Then You Are Good To Go (In My Case I Had To Do That 3 Times)
-If It Stil Does Signal Loss Issue Then You Will Have To Keep On Doing The Procedure Until Signal Loss Hasn't Disappeared

Dear Umair Bhai,
I am currently running V2.09 on my Extereme and having too much freezing issues on both Dishtv HD and SD and signal loss on HD only, so to fix this every time i need to go to antenna setting , while Hotbird works without any issues, I am not an expert and not have enough knowledge of software installation on receiver, so before trying the above and not to brick my receiver i need some understanding in layman language to do the successful installation to avoid signal loss issue on DishtvHD and freezing issue on both HD and SD.

1- should i install V2.12 or V2.10 as going through all the posts i am a bit confused and is there any site from where i can get the software.
2- details method how to install the downloaded ZIP file into receiver. if possible a pictorial / screenshot showing step by step method for a rookie like me and many others with thanks in advance.
3- if we do the factory reset after updating the software to V2.12 will it not delete the newly installed V2.12 and channel data so it means we need to reinstall the new version again. is there any problem to receiver if we factory reset like loss of company server or Appollo IPTV or reduction in server validity.
4- after doing the reset which satellite we need to tune in first should it be dishtv Hd or any one.

I shall be great-full for your guidance bro !

Muhammad Asif

[nightrider]

2.12 ab tak ka best software hai.

Negative, V201 is stable but it doesn't have DVB2IPTV and channel audio goes mute ever few mints for few minutes.

While V212 has same issues like previous ones

What is DVB2IPTV?

It's a function to stream selected DVB channel via IPTV stream from Apollo app.

[nightrider]

Mere be problum solve o gia nightrider ke tariky se thanks bahi

Congrats brother I have freezing on YES HD and hanging on DVB2IPTV channels.

[nightrider]

2.12 ab tak ka best software hai.

Negative, V201 is stable but it doesn't have DVB2IPTV and channel audio goes mute ever few mints for few minutes.

While V212 has same issues like previous ones

Hein O_0 ? Are You Again Having Signal Loss Issue With V2.12
Mine Signal Loss Issue Is Fixed Here Are Some SS. (Tested/Working Fine since Last 5/6 Hours)
Dish TV HD Channel Take 15-18 Sec To Open Once They Are Open They Don't Freez Even For One Sec



Screenshot_2007-01-01-17-26-50.png


Screenshot_2007-01-01-17-26-53.png


I Did The Following Trick

-I Installed V2.12 First Of All
-After That did A Factory Default (All)
-After Doing The Factory Default I Instantly Tuned Dish TV HD (Need To Check Whether Forever Server Is Active Or Not)
-If Dish TV HD Is Now Not Doing Signal Loss And Opens In 15 Sec Then You Are Good To Go (In My Case I Had To Do That 3 Times)
-If It Stil Does Signal Loss Issue Then You Will Have To Keep On Doing The Procedure Until Signal Loss Hasn't Disappeared

Or

You Can Try My Channel Data (It Does Not Have Signal Loss Bug ) I have tuned Dish TV HD In It Try This Channel Data See If You Are Having Signal Loss Issue If You Are Still Having With This Channel Data Then You Will Have To Try The Above Trick

Thank you.

[nightrider]

Not connected with GM Screen

Yes this app doesn't work with new boxes such as starsat and IBOX

[nightrider]

Mere be problum solve o gia nightrider ke tariky se thanks bahi

Please advise your issue on box.

[Umair Malik]

[I Did The Following Trick

-I Installed V2.12 First Of All
-After That did A Factory Default (All)
-After Doing The Factory Default I Instantly Tuned Dish TV HD (Need To Check Whether Forever Server Is Active Or Not)
-If Dish TV HD Is Now Not Doing Signal Loss And Opens In 15 Sec Then You Are Good To Go (In My Case I Had To Do That 3 Times)
-If It Stil Does Signal Loss Issue Then You Will Have To Keep On Doing The Procedure Until Signal Loss Hasn't Disappeared

Dear Umair Bhai,
I am currently running V2.09 on my Extereme and having too much freezing issues on both Dishtv HD and SD and signal loss on HD only, so to fix this every time i need to go to antenna setting , while Hotbird works without any issues, I am not an expert and not have enough knowledge of software installation on receiver, so before trying the above and not to brick my receiver i need some understanding in layman language to do the successful installation to avoid signal loss issue on DishtvHD and freezing issue on both HD and SD.

1- should i install V2.12 or V2.10 as going through all the posts i am a bit confused and is there any site from where i can get the software.
2- details method how to install the downloaded ZIP file into receiver. if possible a pictorial / screenshot showing step by step method for a rookie like me and many others with thanks in advance.
3- if we do the factory reset after updating the software to V2.12 will it not delete the newly installed V2.12 and channel data so it means we need to reinstall the new version again. is there any problem to receiver if we factory reset like loss of company server or Appollo IPTV or reduction in server validity.
4- after doing the reset which satellite we need to tune in first should it be dishtv Hd or any one.

I shall be great-full for your guidance bro !

Muhammad Asif

1.Before Doing That Trick With V2.12 I Was Also On V2.09 I Had To Also Do That Thing Of Going Into Installation Menu.

2.You Should Install V2.12 In My Honest Opinion Its The Best SW So Far For Starsat 2000 Extreme
You Can Download It From Here
Click Here To Download

3.You Will Just Need To Extract This Software In To The USB And Just Open It By Going In To USB Menu

4.After Installing Version 2.12 You Will Need To Factory Default The Receiver Choose (All) In Factory Default Menu The Password Is 0000. And After That See Your Internet And Then Go To Server Settings And See Whether Forever Server Is Connected Or Not (Press 3 If You Dont Find It In 40 Number Server)After That You Will Have To Tune Dish TV HD If It Doesn't Have Signal Loss Issue And Opens In 20 Sec With No Freezing Thrn You Are Good To Go. Otherwise You Will Have To Repeat This Procedure Again And Again (No Need To Install V2.12 Again Just Factory Default) Until Signal Loss Issue Hasn't Departed.

4. Your Forever Server And IPTV Ending Date Will Remain Same As Your IPTV And Server Validity Is Stored In Serial Number Of Your Receiver I Have Done Multiple SW V2.11/10/09/01 To Find One That Doesnt Have Freezing Issue But This Tricked Has Solved My Issues

[Khan jamaldini]

Mere be problum solve o gia nightrider ke tariky se thanks bahi

Please advise your issue on box.

Bahi mere pas ab 9east freezing kar raha hai 5 second chalta hai phir freezing freezing kar raha hai baqi filhal sub tek hai ..and phle 201 soft version ke ilawa baqi sub soft version par reciver hang ota ta ab filhal tek hai

[nightrider]

Mere be problum solve o gia nightrider ke tariky se thanks bahi

Please advise your issue on box.

Bahi mere pas ab 9east freezing kar raha hai 5 second chalta hai phir freezing freezing kar raha hai baqi filhal sub tek hai ..and phle 201 soft version ke ilawa baqi sub soft version par reciver hang ota ta ab filhal tek hai

Please read above mentioned procedure by #Umair Malik

[baksho]

Ftp downloads help