#########################################################################
NCam cardserver v1.2-r3, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2017 developed by Javier Sayago (Javilonas).
#########################################################################
************************************************************************
Important notice !!
This is the OFFICIAL version (20.3.2017)
There are no later versions.
If you have downloaded any version, listed as 1.2, 1.3, 1.4, etc ... These are FAKE versions.
Be very careful when downloading non-OFFICIAL versions,
we are not responsible for those versions or what their authors may have added.
Signed: Javier Sayago (Javilonas)
************************************************************************
Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek Play and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube and other similars).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam-x86_64.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
************************************************************************
Ncam settings web::
Ncam Admin Control: http://127.0.0.1:8181/" onclick="window.open(this.href);return false; (192.168.x.x)
user: root
password: ldteam
Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config
SoftCam.Key Not included!!
************************************************************************
Changelog v1.2-r3:
- Fix Cuts every 10 seconds and pixelations for CAIDs 09C4 and 098C.
http://uptobox.com/zexhqrjvvobo" onclick="window.open(this.href);return false;
