Change Mac Address Of Your Clone Dreambox

[oscamlover]

telnet command for mac address
ifconfig
Original Mac address starts with 00:09:34:xx:xx:xx
For enigma1 box


Create a file called init (no extension - if you do it in notepad, it will add a .txt extension. the way around this is to save as init & put inverted commas around it - eg "init" & that will save it as init without any extension

Put this line into the file -

Code: Select all

Code: Select all

ifconfig eth0 down; ifconfig eth0 hw ether 00:09:23:47:97:E5; ifconfig eth0 up

Then upload the file to VAR/ETC & reboot

For enigma2 box
go to etc/network folder
and edit file interfaces
put this line and save

Code: Select all

pre-up ifconfig eth0 hw ether 00:09:23:47:97:E5

reboot box now and enjoy with new mac address

[/color]

[dodi2000]

Hummm My Question is Why we need to change the mac address, is there hidden benefits ???

[imranmba]

WE NEED TO CONNECT NET WHICH SECURE AS MAC SECURITY IF WE FOND IF MAC ADDRESS WHICH USE IN THIS WE CHANGE IT AS & CONNECT TO NET ENJOY

[dodi2000]

WE NEED TO CONNECT NET WHICH SECURE AS MAC SECURITY IF WE FOND IF MAC ADDRESS WHICH USE IN THIS WE CHANGE IT AS & CONNECT TO NET ENJOY

[imranmba]

MY OFFICE NET IS SECURED WITH MAC SECURITY WHICH MEANS THOSE DEVICE CAN CONNECT WITH OFFICE INTERNET WHICH IS MAC ADDRESS ARE REGISTER IN OFFICE INTERNET ROUTER OTHER DEVICE CAN NOT CONNECT WITH IT BUT WE KNOW OUR WIFI USB ADOPTER WHICH MAC ADDRESS ARE REGISTER IN IT SO WE CHANGE OUR RECEIVER MAC ADDRESS AS SAME JUST IN USB WIFI ADOPTER SO WE CAN CONNCET WITH INTERNET

I TRY TO DO MY BEST FOR U DEAR