No Ca found error in dm800hd se

[asadq1]

[quote="FARRUKH"
ok i will also try with dreamup & bro my box is ssl84d... is it work with 84d also? its showing 84b?[/quote]

bhai DM 800se 2.1 SIM wale box ssl84d aur ssl84b both version k images kam karte hn

[Aliraza63]

84B is old boot loader for old drivers and old achitecture. 84D is new Bootloader with new Drivers and architecture .. when u install new image then only use new boot loader . avoid back which often cause to creat bad sector in flash. some of them are removeable but if its physicaly damaged then its unable to remove

[FARRUKH]

ssl84d

First of install this boot loader with browser
http://world-of-files.net/index.php?act ... Bootloader&" onclick="window.open(this.href);return false;

Install any image in them these are light and clean images
http://www.mediafire.com/download/f3o8v ... iMAHER.rar" onclick="window.open(this.href);return false;
http://www.mediafire.com/download/859v8 ... iMAHER.rar" onclick="window.open(this.href);return false;
https://mega.co.nz/#!M5gyBQhY!IcwBIkWLI ... EBUMM?dl=1" onclick="window.open(this.href);return false;

If the problem is still there then use dream up via service cable and check the bad sector in flashand report. if the bad sector exists then I shall advise u further

Bro i tried the above method bt when i connected the dm with dreamupp n after upldating bootloader. dreamup uploaded the flash loader n wait for acknowledge... dm showing error no ca foung in startup. Without dreamup connection its not showing this error. Now whats the prb plz guide thnx.

[Aliraza63]

Try with any old version like 1.3.3 or 1.3.4

[FARRUKH]

Try with any old version like 1.3.3 or 1.3.4

bro i tried with 1.3.3.9 n 1.3.3.4... same error on both... i think bootloader is also not updating on it. its showing bootloader of year 2011 n i think the bootloader u given to me is newer than that. i updated it 3 times...

[Aliraza63]

Try with any old version like 1.3.3 or 1.3.4

bro i tried with 1.3.3.9 n 1.3.3.4... same error on both... i think bootloader is also not updating on it. its showing bootloader of year 2011 n i think the bootloader u given to me is newer than that. i updated it 3 times...

is network connected with it also ? check it if then connect lan cable with it also. I am sorry plz dont mind but it seems ur box's flash has must bad sector some where .

Check this post also its mine old post on another eu forum may be it will give some help
viewtopic.php?f=97&t=19297" onclick="window.open(this.href);return false;

[FARRUKH]

Try with any old version like 1.3.3 or 1.3.4

bro i tried with 1.3.3.9 n 1.3.3.4... same error on both... i think bootloader is also not updating on it. its showing bootloader of year 2011 n i think the bootloader u given to me is newer than that. i updated it 3 times...

is network connected with it also ? check it if then connect lan cable with it also. I am sorry plz dont mind but it seems ur box's flash has must bad sector some where .

Check this post also its mine old post on another eu forum may be it will give some help
viewtopic.php?f=97&t=19297" onclick="window.open(this.href);return false;

ok bro i sort the no ca found error problem. my box is sunray. & i used sunray flashup now its initialized via http. now when i flashup with ur given images. its showing error of wrong architecture... see

[Aliraza63]

Yes this the problem
It has 3 reasons .
1. U r using the image which build for new kernal .. and must be some where bad sector which is not allowing to complete the process . So only try one of these images

https://mega.co.nz/#!pkQWRJhD!h2C7McLln ... 3NhR0?dl=1" onclick="window.open(this.href);return false;
https://mega.co.nz/#!YQoXhK5Z!5QKf_5IXK ... jKYSaNqLlQ" onclick="window.open(this.href);return false;
https://www.sendspace.com/file/w7j720" onclick="window.open(this.href);return false;
2. most important .. agr in main se koi bhi image ho jaye to plz plz koi ur image ya plugin install na karna.. mujhe shak hai ye bad sector kehin physical bad sector na ho ( Allah kare ke aisa na ho). agar phir bhi na ho to mujeh yehin reply back karen i am waiting