How to use Mgcamd with CCcam and Newcs

User avatar
TAHIR
Senior Registered Member
Senior Registered Member
Posts: 657
Joined: 03 Oct 2013, 9:42 am
Location: PAKISTAN
Has thanked: 2 times

How to use Mgcamd with CCcam and Newcs

Post by TAHIR »

This is some information about how to add C & N lines to mgcamd.
This particular post will refer to its use for the Azbox, but can be adopted to use with other receivers using Enigma and Enigma2.
The location of the files will depend on the image you use. In linux they will be in /var/keys or /usr/keys or something similar.
For the Azbox, all files will be found in the folder /PLUGINS/OpenXCAS/mgcamd which makes things extremely simple and is why I selected that receiver.

There are 3 important files needed for sharing:

mg_cfg
cccamd.list
and
newcamd.list

To allow mgcamd to share from both CCcam and Newcs, you must ensure that in the file mg_cfg, you edit the settings for the value of G: { x }

Settings are cumulative, you sum the values of the emus you want to connect to.. Have a quick look, but don't dwell on it.

G: { 5 } will work, as will G: { 33 }

Simple so far? it gets easier..

Edit cccamd.list and paste in a C-line as normal e.g.

C: myfriend.dyndns.com 12000 myname mypass

close and save.

Edit newcamd.list

You may see something like:

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000

leave that alone..

If someone gives you an N-line like this
N: myfriend.dyndns.com 15000 myname mypass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

add it to the end of the newcamd.list like this:

CWS = myfriend.dyndns.com 15000 myname mypass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 server1

Close and save
Restart mgcamd.
imtiazansari
Registered Member
Registered Member
Posts: 217
Joined: 02 Nov 2013, 7:47 pm
Location: Karachi.

Re: How to use Mgcamd with CCcam and Newcs

Post by imtiazansari »

Good Sharing ...
Iffiamj
Registered Member
Registered Member
Posts: 87
Joined: 11 Oct 2013, 6:42 pm

Re: How to use Mgcamd with CCcam and Newcs

Post by Iffiamj »

thank you for the awesome info :surprise: :surprise:
User avatar
zubair8xm
Registered Member
Registered Member
Posts: 436
Joined: 02 Aug 2013, 8:29 pm
Been thanked: 2 times

Re: How to use Mgcamd with CCcam and Newcs

Post by zubair8xm »

bhai kya is tarhan hum c-line aur n-line aik sath use kar saktay hain ????
DREAMBOX DM800HDse Clone Sim 2.10
User avatar
Golden
Vip
Vip
Posts: 4648
Joined: 14 Jun 2013, 6:00 am
Location: Pakistan
Has thanked: 1301 times
Been thanked: 671 times

Re: How to use Mgcamd with CCcam and Newcs

Post by Golden »

zubair8xm wrote:bhai kya is tarhan hum c-line aur n-line aik sath use kar saktay hain ????
:yes: :yes: :yes:

But With Slow Response !
fahad
Registered Member
Registered Member
Posts: 16
Joined: 22 Oct 2013, 6:46 pm

Re: How to use Mgcamd with CCcam and Newcs

Post by fahad »

:loveu: :thank:
SHAKEEL MALIK
Senior Registered Member
Senior Registered Member
Posts: 666
Joined: 09 Sep 2013, 2:23 pm

Re: How to use Mgcamd with CCcam and Newcs

Post by SHAKEEL MALIK »

good help try kar ta ho
ali64
Registered Member
Registered Member
Posts: 457
Joined: 04 Sep 2013, 9:53 am
Location: Karachi
Been thanked: 19 times

Re: How to use Mgcamd with CCcam and Newcs

Post by ali64 »

Kia newcamd.list main N line Add kartay waqat Start main CWS = aur Last main Server 1 likhna zarori hay
User avatar
Golden
Vip
Vip
Posts: 4648
Joined: 14 Jun 2013, 6:00 am
Location: Pakistan
Has thanked: 1301 times
Been thanked: 671 times

Re: How to use Mgcamd with CCcam and Newcs

Post by Golden »

:deny: :deny: :deny:

CWS Likhna Mgcamd Ki RequireMent Hai WhereAs Last Main Server 1 Ya Kuch Aur Likna Zaroori Nahin !
ali64
Registered Member
Registered Member
Posts: 457
Joined: 04 Sep 2013, 9:53 am
Location: Karachi
Been thanked: 19 times

Re: How to use Mgcamd with CCcam and Newcs

Post by ali64 »

Thanks For Reply Golden Friend :thank:

Who is online

Users browsing this forum: No User AvatarBytespider [Bot], No User AvatarClaude [Bot], No User Avatarxalaflix, User avatarYandex [Bot] and 30 guests