Page 25 of 26
Re: Shabbir A+ 6 feet Dish Antenna
Posted: 15 May 2020, 2:20 pm
by DM 900uHD
Athart wrote: ↑15 May 2020, 11:26 am
Meri Dish ko bhi nazr lag gae he. Pehle 1695 scan hote the, ab 1400 bhi mushkil se scan hote hen.
nazar naheen lugi ,issko gurmi lug gye hay ,,,berf ka istemal chore dia ho ga
last night AliDogar moved his Paras towards 13*E and after watching its result ...he was going to suicide
Re: Shabbir A+ 6 feet Dish Antenna
Posted: 15 May 2020, 3:25 pm
by Athart
DM 900uHD wrote: ↑15 May 2020, 2:20 pm
Athart wrote: ↑15 May 2020, 11:26 am
Meri Dish ko bhi nazr lag gae he. Pehle 1695 scan hote the, ab 1400 bhi mushkil se scan hote hen.
nazar naheen lugi ,issko gurmi lug gye hay ,,,berf ka istemal chore dia ho ga
last night AliDogar moved his Paras towards 13*E and after watching its result ...he was going to suicide
Re: Shabbir A+ 6 feet Dish Antenna
Posted: 15 May 2020, 3:25 pm
by Shahid Geo
Signal improve howe hai kya
Sindh Ghotki Me??
Re: Shabbir A+ 6 feet Dish Antenna
Posted: 15 May 2020, 4:40 pm
by aimanalius
DM 900uHD wrote: ↑15 May 2020, 11:16 am
whereas you need this type of LNB holder
I think you din't try to explore this thread from the beginning
I ve explored this thread but i dont know where can i find this customized feedhorn. its not available in market
Re: Shabbir A+ 6 feet Dish Antenna
Posted: 15 May 2020, 9:10 pm
by DM 900uHD
aimanalius wrote: ↑15 May 2020, 4:40 pm
I ve explored this thread but i dont know where can i find this customized feedhorn. its not available in market
if you explored then did you notice why I'm using three supporting rods instead of 4 ?
I couldn't get the optimal result with four LNB supporting rods due to inaccuracy of focal point ..I drilled two extra holes around the outer collar by measuring the same distance between one point to another.
this type of LNB holder can be manufactured from any welder shop by giving sketch/diagram.
Re: Shabbir A+ 6 feet Dish Antenna
Posted: 18 Aug 2020, 12:39 am
by perl13
Equipment Overview:
AXING [Germany] Diseqc Combined with Venton 4XL with an inline Signal amplifier also by AXING.
Signal carrier-- copper coated single shielded cable by Belden USA Catagory RG6-U
Connected Sat-- 13E[tuned] 16E[Untuned/Not Adjusted] 9E[Tuned] 7E[Tuned] 85E[Partially Tuned] 105E[Tuned] 108.5E[Tuned]
Icone Iron Pro as the Tuner
So after comparison i can report that an ordinary Disecq Switch will most probably reduce signal strength by a significant number for weak Transponders. After installing the signal strength significantly improved with AXING SPU.
As an electronics engineer i can tell you that wherever there is heat there will be losses @todays heat index of 54 Celsius at Peshawar [Attached Screenshot] the received signals were just perfect.
Remind you it is not cheap to buy any of the above products. however if you are an enthusiast you will have to pay the price.
Thank you.
Data Sheet....
AXING DISECQ
https://axing.com/en/pdf-generation/SPU08100
Inline Signal Amplifier-- AXING SVS 2-01
https://axing.com/en/pdf-generation/SVS00201
Venton 4XL LNB
DataSheet not Availble
https://www.satshop.ch/Venton-Quattro-L ... ocket-Feed
Re: Shabbir A+ 6 feet Dish Antenna
Posted: 18 Aug 2020, 8:24 am
by Athart
If you increase Dish Size, then no need to pay for extra stuff.
Re: Shabbir A+ 6 feet Dish Antenna
Posted: 18 Aug 2020, 11:19 am
by perl13
Athart wrote: ↑18 Aug 2020, 8:24 am
If you increase Dish Size, then no need to pay for extra stuff.
Sometimes its just not easy to fit large antennas in a space that is frequently rundown by climate especially wind that have had many of my antennas knocked down. all of my 180CM's having a hard time even punched holes due to extreme weather.
For most of us 240CM's is out of the question !
Re: Shabbir A+ 6 feet Dish Antenna
Posted: 18 Aug 2020, 11:37 am
by Shahid Geo
ok
Re: Shabbir A+ 6 feet Dish Antenna
Posted: 17 Feb 2021, 9:08 pm
by eng_lhr
bahi ye dish 5.5 ft he ha app ko shop walay na galat bataya ho ga SHABBER walay solid 6 ft ke diah nahe banaty
ye wali 4 ft 4.5 ft or 5.5 ft ke ha
shabber ke 6 ft ke pics wali hota ha
shabber ka no lay ke un ko call kr lo
shop waly ke joot say manufacture badname hoa jata ha