experts >>>>weak signals solution

[asadq1]

is it possible to boost signals using amplifying device somehow to make detectable for tuner of DM boxes?

[kalpikos]

Hello asadq1

I know that a sat Inline amplifier can't give you what you expected.

These devices amplify the signal but also give the inherent "noise" that comes into your receiver.

The result will be to have worse signal.

If you really want to improve your signal buy a bigger dish.

As alternative solution is to look at this method:

sat-dish-alignment/improve-dish-signal- ... 22462.html" onclick="window.open(this.href);return false;

[asadq1]

@kalpikos
6 feet for 105E and facing scratch at HUM network using DM, but it works fine at the other simple HD receivers

[Aliraza63]

@kalpikos
6 feet for 105E and facing scratch at HUM network using DM, but it works fine at the other simple HD receivers

its matter of Receiver's tuner . most of the clones available in pakistan are 2nd class clones with cheap hardware .. number of time I have seen this issue and found the hardware weakness.
If u will ask for technical reason . I have seen it drops the volts at the caps placed at tuner 470uf and 680uf both caps drops volts. but tuner in some DM which have Board E-11 are working fine only D6 boards have problems