koi ezpert talibj hello spark folder delete hogaya dcc

[jamalnasir4242]

who plugin kertey mujh se plugin ki bajiye spark ka plugin delete hogaya dcc se abhi kaise wapis update ker abhi dcc se restore hoga plzzzzz hellppppppppppppp

[talibb]

ther are rescue image two methods
1=usb say
http://golden-mgcamd.net/spark-receiver ... 16421.html" onclick="window.open(this.href);return false;
2= computetr ethernet port say
http://golden-mgcamd.net/spark-receiver ... 16335.html" onclick="window.open(this.href);return false;

[jamalnasir4242]

thankssss for reply sir dcc se thora help kerge team vivwer id me pleaseeeeeeeeeeeeeee

[jamalnasir4242]

talib bahi helpppppppppppppppp me in team vivwer plzzzzzzzzzzzzzzzzzzzzz

[talibb]

thankssss for reply sir dcc se thora help kerge team vivwer id me pleaseeeeeeeeeeeeeee

bhai ab dcc connect naheen hooga
only rescue image
1=usb
2= ether net
all files mein nay upper posts mein dee hein
buhat say friends usb aur kuchh ether net say ok hoo gai hein but one friend ok naheen huwa

[ashiqnoorm]

thankssss for reply sir dcc se thora help kerge team vivwer id me pleaseeeeeeeeeeeeeee

bhai ab dcc connect naheen hooga
only rescue image
1=usb
2= ether net
all files mein nay upper posts mein dee hein
buhat say friends usb aur kuchh ether net say ok hoo gai hein but one friend ok naheen huwa

yar me to bahut tak gaya ho... yar kia enigma ke through software restore ni kar sakte ... ya enigma me dcc se kisi tareke se restore ni ho sakta me ne backup banaya ta......

ya yar agar kisi mechanic ka pata ho jo is ki dobara programing kara de....

[talibb]

jab aiup spark slect kartay hoo boot say to kiya aita hay front vfd per

[ashiqnoorm]

jab aiup spark slect kartay hoo boot say to kiya aita hay front vfd per

aiup matlab?

[jamalnasir4242]

jab aiup spark slect kartay hoo boot say to kiya aita hay front vfd per

JUB USB DALTA HOO TU T and to flashing atta hee net se kaise hoga talib bhai helpppppppppppp me team vivwer

[m_saleeM]

A period not to exceed two minutes
has been the problem of the brothers addressed the problem was resolved in a period of 15 minutes by the rescue file but Many times the process does not succeed and remain stuck in the machine, despite talking about Akamaleh process successfully
solution experimenter surest

Normal flash ....... 2 ....... 3 3 2 5 5 ........ 2 -melv Alboot u-boot 131-11

download

http://www.2shared.com/file/w3gAfeHa/u-boot_131-11.html" onclick="window.open(this.href);return false;
3-Loader , a Heber Tarminal program HyperTerminal


download

http://www.hilgraeve.com/hyperterminal/" onclick="window.open(this.href);return false;
way:
First, you must modify the loader data are as follows:


1. Open [HyperTerminal] and set default parameters
Symbol rate: [1152000]
Data bits: [8]
Parity: [None]
Stop Bits: [1]
Data Flow Control: [None]
2. Select [Transfer / File Transfer] Option
3. Select [u-boot.bin] and use [Ymodem] Option, send file
now connect the receiver to your computer by cable and get back to the receiver Secondly, must do the following to the receiver reads Loader

-nhal Receiver from behind and be Dhagtin on Waukee interface receiver
-bad 5 seconds note the word [Forc] device interface
-ndguet Waukee button left Left
-nlahz receiver interface wrote LOAD and the loader computer worked its pipeline progress
the process ends in two minutes and stays bot but when installing TV note Almino has appeared
Process:
We Option B of the box to select Transfer / File Transfer
and choose which of his boot file attachments u-boot.bin
then choose finally send file
And do not forget the pressure on Spas Bucky board computer button to activate the loader