Expert i Want Oscam-svn11390 Cam For Videocon line

[burhanafridi603]

a lot of people posted picture in this post and they are using the same provider but they dont have issue not mentioned by them

[samkhp110]

my friend cline or newcamd is not problem but problem is on configuration that you use ...

[burhanafridi603]

Do you have good configuration

Can you give it to me

[jahan25]

my friend cline or newcamd is not problem but problem is on configuration that you use ...

Bhai Cline or Mgcamd ka he mera Masla tha or woh ab hal ho gaya hai Seref Cline Change kernay say kukay Server Provider nay mujay Cline C line de the phr jb ek bhai nay kaha Mgcamd to manay Server Provider say Mgcamd line le to usi waqt he Chanel Start hogay.Thnx

[Chacha G]

Bhai Cline or Mgcamd ka he mera Masla tha or woh ab hal ho gaya hai Seref Cline Change kernay say kukay Server Provider nay mujay Cline C line de the phr jb ek bhai nay kaha Mgcamd to manay Server Provider say Mgcamd line le to usi waqt he Chanel Start hogay.Thnx

@jahan25
kindly help me to decode videocon on my Dreambox ,I'm sharing the files .
OScam.conf
[global]
logfile = /dev/tty
nice = -1
preferlocalcards = 1

[cache]

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
request_mode = 1
delayer = 70
ecminfo_type = 4
user = enigma
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8888
httpuser =
httppwd =
httptpl = /etc/tuxbox/config/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1

OScam server description
[reader]
label = constant.cw
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 2600,0B00,0500,0963,06AD,0940,06ad
ident = 2600:000000;0B00:000000;0500:032830;0963:000000;06AD:000000;0940:000000
group = 1

[reader]
label = oscam_emu
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010,06AD
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000;2600:000000;FFFF:000000;0E00:000000;1010:000000;06AD:000000
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014

[reader]
label = cn.smartcam.fun
protocol = newcamd
device = cn.smartcam.fun,7771
key = 0102030405060708091011121314
user = xxxxx
password = ps3d
inactivitytimeout = 1
group = 2 (this portion was added by me)

user description
[account]
user = enigma
description = dvbapi
failban = 1
au = 1
emmreassembly = 1
group = 1,2,3,4,5,6,7,8,9
cccmaxhops = -1
cccreshare = 1
cccignorereshare = 1


the above files work fine with all other encryption to decode but NOT work on videocon.

[burhanafridi603]

add this in your blue reader which is for videocon

disablecrccws = 1

[jahan25]

Bhai Cline or Mgcamd ka he mera Masla tha or woh ab hal ho gaya hai Seref Cline Change kernay say kukay Server Provider nay mujay Cline C line de the phr jb ek bhai nay kaha Mgcamd to manay Server Provider say Mgcamd line le to usi waqt he Chanel Start hogay.Thnx

@jahan25
kindly help me to decode videocon on my Dreambox ,I'm sharing the files .
OScam.conf
[global]
logfile = /dev/tty
nice = -1
preferlocalcards = 1

[cache]

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
request_mode = 1
delayer = 70
ecminfo_type = 4
user = enigma
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8888
httpuser =
httppwd =
httptpl = /etc/tuxbox/config/
httprefresh = 30
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
http_status_log = 1

OScam server description
[reader]
label = constant.cw
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 2600,0B00,0500,0963,06AD,0940,06ad
ident = 2600:000000;0B00:000000;0500:032830;0963:000000;06AD:000000;0940:000000
group = 1

[reader]
label = oscam_emu
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010,06AD
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000;2600:000000;FFFF:000000;0E00:000000;1010:000000;06AD:000000
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014

[reader]
label = cn.smartcam.fun
protocol = newcamd
device = cn.smartcam.fun,7771
key = 0102030405060708091011121314
user = xxxxx
password = ps3d
inactivitytimeout = 1
group = 2 (this portion was added by me)

user description
[account]
user = enigma
description = dvbapi
failban = 1
au = 1
emmreassembly = 1
group = 1,2,3,4,5,6,7,8,9
cccmaxhops = -1
cccreshare = 1
cccignorereshare = 1


the above files work fine with all other encryption to decode but NOT work on videocon.

First of All Bhai ap ki line Cline hai ya Mgcamd?

Bhai mere wala Oscam use karay kukay is per working hai or is main Emu or Keys dono hai bss ap apni Mgcamd line add karay us kay bad apna Box Restart karay phr Oscam 11391 Start karay...Thnx

oscam-11391.rar

(770.71 KiB)

[Chacha G]

add this in your blue reader which is for videocon

disablecrccws = 1

Wowwwwwww
Videocon DTH is working fine now after adding that line
Thanks a lot @burhanafridi603
@jahan
I was trying mgcamd and I also proposed you same in previous post

[burhanafridi603]

Thats great its working for you

does your channels freezes or its running smoothly

[kashif s]