After Rescue Image Load in Receiver LCD.

[ashiqnoorm]

seual -- electronics ---hakeem arcade hussain agahi road

multan ==ph 0614587734

se rabta kren .

dear brother same problem mera bhi tha

Brother...


kitna kharcha ata is par... or kia rescue image be kia matlab spark ok ho gaya....

[ABBAS 786]

dosr method rescue image computer ethernet with settings ip192.168.40.19 or 192.168.50.28 in my network local area connection=propertis=internet protocol TCP/IP and select following ip address apply and save
and tool of ugrade
Upgrade rescure spark by tftp:
Upgrade Step: 1.copy [mImage] and [userfsub.img] to any folder of your PC, for example [C:/spark]
2.select folder in TFTP tools:
3.Keep Pressing [OK] Button in Front Panel, then power on STB.
4.After 5 seconds you will see [Forc] in LED, release [OK] button and press

Button.
5.If everything OK, You will see [T LD] shining in LED
and you will see some debug information in TFTP Server,
like “Mon Oct 25 14:02:36 2010: Sending 'mImage' file to 192.168.40.19 in binary mode Mon Oct 25 14:02:39 2010: Successful.
Mon Oct 25 14:02:50 2010: Sending 'userfsub.img' file to 192.168.40.19 in binary mode Mon Oct 25 14:03:33 2010: err
bhai yahn tak sub hota hy phor 67% pr err ajata hy

ab kya karun

kya ab hyper terminal use krun ftp connact hota hy koch file bhe update hoty hn phir err 67% pr aja hy

ple help me

mn ne phaly bhe kafi raciver ko rescu kya wo set ho gy

ye tfd se connact hota hy file bhe utata hy phir rescu ho raha hota hy

jab 67% hota hy time out err ajata hy
BAHI ye problam araha hy