scanning issue with asiasat 3s and hotbird

[nice26]

Hello @nice26 i have tried your XML but no channel came, making me little frustrating because if issue with LNB or Sat thanit should not receive on other receiver.

upload your configuration ss here.

[moonji54]

Hello brother see the configuration no succeed even after using ur xml

[adnan001]

bhai jahan per c band likha hai wahan per user defined kar k 05150 5750 06500 karien

see this picture agar samj na aye then app ko complete pics de doon ga its so easy

[nice26]

Hello brother see the configuration no succeed even after using ur xml

aap ki config theek hai aap ke stb mein 2 tuners hain kahin aisa to nahi ke aap nay 2 seperate wires both tuners se connect ki hain?

[moonji54]

@nice26, bhai mere pass twin tuner he hai, aur mein nay tuner one pay he sirf connect kya hoa hai two dishes with diseqc 4 ports switch.tuner 2 not configured mein salected hai.with me hotbird all H/V being scanned sirf Asiasat 7 main he V polarity scan ho rahi hai. i have tried your XML. but it fail on H Polarity. I have other HD receiver with that no issue, Meri Location UAE hai kya UAE mein 600 minus kerne say a saka hai. main nay satfinder mein minus 600 say try ki lekin no signal.

[moonji54]

@adan001, Brother i have tried you settings no solution.thanx for your support

[nice26]

@adan001, Brother i have tried you settings no solution.thanx for your support

agar adnan001 bhai ki settings ki hain to satellite.xml normal use karni thi kyun ke is setting ke sath there is no need to minus 600

[moonji54]

@nice26 I tried openspa image and than I tried Adnan bhai settings now it's scanning h polarity channels but not all h polarity. I will do one more scan to check

[FARRUKH]

@nice26 I tried openspa image and than I tried Adnan bhai settings now it's scanning h polarity channels but not all h polarity. I will do one more scan to check

bro enigma 2 mai prb ata hay channels ka mai apko shamko ek satellites.xml ki file dunga ap wo update krna or than search krna aa jayenge. agr phir b na aye to manual tp add kar k search krna sab ok ho jayenge. ok

[ayanahmed]

Hello sleepin people. Any body wish to help me out if possible. My problem is no signal for c band and ki band scanning.

Manually tune C-Band Channels in Enigma2 like this:

Always minus the desired frequency from 14900 to convert C frequency to ku frequency and then put it for tunining for example "Macau Lotus TV" has the following tuning values:

3880 H
DVB-S/MPEG-2
DVB-S/MPEG-4

27500 3/4

Now 14900 - 3880 = 11020 the rext will stay same now tune Asia sat 7 with this frequency i.e., 11020 you will get Lotus tuned.