Mgcamd-Kristen Stewart

[notari]

here is my sys.log

Mar 14 09:07:47 192.168.100.3 [mgcamd] signal 15 received
Mar 14 09:07:47 192.168.100.3 [mg0] stoping camd..
Mar 14 09:07:47 192.168.100.3 [mgcamd] emm stopped
Mar 14 09:22:39 192.168.100.3 [mgcamd] signal 15 received
Mar 14 09:22:39 192.168.100.3 [mg0] stoping camd..
Mar 14 09:22:39 192.168.100.3 [mgcamd] emm stopped
Mar 14 09:22:43 192.168.100.3 Mgcamd 1.38c by mixvt, patched by LEO11 on Dez 04 2012
Mar 14 09:22:43 192.168.100.3 [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:1:192.168.100.4:514 Reread:0
Mar 14 09:22:43 192.168.100.3 [mg] Ecm cache time: 15
Mar 14 09:22:43 192.168.100.3 Box type: dbox2
Mar 14 09:22:43 192.168.100.3
Mar 14 09:22:43 192.168.100.3 Keys readed
Mar 14 09:22:43 192.168.100.3
Mar 14 09:22:43 192.168.100.3
Mar 14 09:22:43 192.168.100.3 [mgcam] emm thread started
Mar 14 09:22:43 192.168.100.3 got 56 cmd 9F
Mar 14 09:22:43 192.168.100.3 [mg0] namespace 820000 t-id 157C on-id 13E
Mar 14 09:22:43 192.168.100.3 [mg0] descramble on 1, source 0
Mar 14 09:22:43 192.168.100.3 [mg0] service 144 index 0 pmt pid 117 (1), pids: video 0x0204, audio 0x0244 0x02B2
Mar 14 09:22:43 192.168.100.3 CaPID: 0x05EC ProvID: 000000
Mar 14 09:22:43 192.168.100.3 [mg0] No ******* key(s) found for id 604 keynr 06
Mar 14 09:22:43 192.168.100.3 [mg0] network can't decode
Mar 14 09:22:43 192.168.100.3 [mg0] No ******* key(s) found for id 604 keynr 06
Mar 14 09:22:43 192.168.100.3 [mg0] network can't decode
Mar 14 09:22:43 192.168.100.3 [mg0] pid 0x05EC failed to decode.
Mar 14 09:22:43 192.168.100.3 [mgcamd] emm started
Mar 14 09:22:43 192.168.100.3 CaPID: 0x0500 ProvID: 000000
Mar 14 09:27:48 192.168.100.3 [mgcamd] signal 15 received
Mar 14 09:27:48 192.168.100.3 [mg0] stoping camd..
Mar 14 09:27:48 192.168.100.3 [mgcamd] emm stopped
Mar 14 09:27:52 192.168.100.3 Mgcamd 1.38c by mixvt, patched by LEO11 on Dez 04 2012
Mar 14 09:27:52 192.168.100.3 [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:1:192.168.100.4:514 Reread:0
Mar 14 09:27:52 192.168.100.3 [mg] Ecm cache time: 15
Mar 14 09:27:52 192.168.100.3 Box type: dbox2
Mar 14 09:27:52 192.168.100.3
Mar 14 09:27:52 192.168.100.3 Keys readed
Mar 14 09:27:52 192.168.100.3
Mar 14 09:27:52 192.168.100.3
Mar 14 09:27:52 192.168.100.3 [mgcam] emm thread started
Mar 14 09:27:52 192.168.100.3 got 56 cmd 9F
Mar 14 09:27:52 192.168.100.3 [mg0] namespace 820000 t-id 157C on-id 13E
Mar 14 09:27:52 192.168.100.3 [mg0] descramble on 1, source 0
Mar 14 09:27:52 192.168.100.3 [mg0] service 144 index 0 pmt pid 117 (1), pids: video 0x0204, audio 0x0244 0x02B2
Mar 14 09:27:52 192.168.100.3 CaPID: 0x05EC ProvID: 000000
Mar 14 09:27:52 192.168.100.3 [mg0] No ******* key(s) found for id 604 keynr 06
Mar 14 09:27:52 192.168.100.3 [mg0] network can't decode
Mar 14 09:27:52 192.168.100.3 [mg0] No ******* key(s) found for id 604 keynr 06
Mar 14 09:27:52 192.168.100.3 [mg0] network can't decode
Mar 14 09:27:52 192.168.100.3 [mg0] pid 0x05EC failed to decode.
Mar 14 09:27:52 192.168.100.3 [mgcamd] emm started
Mar 14 09:27:52 192.168.100.3 CaPID: 0x0500 ProvID: 000000
Mar 14 09:30:17 192.168.100.3 [mgcamd] signal 15 received
Mar 14 09:30:17 192.168.100.3 [mg0] stoping camd..
Mar 14 09:30:18 192.168.100.3 [mgcamd] emm stopped
Mar 14 09:30:22 192.168.100.3 Mgcamd 1.38c by mixvt, patched by LEO11 on Dez 04 2012
Mar 14 09:30:22 192.168.100.3 [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:1:192.168.100.4:514 Reread:0
Mar 14 09:30:22 192.168.100.3 [mg] Ecm cache time: 15
Mar 14 09:30:22 192.168.100.3 Box type: dbox2
Mar 14 09:30:22 192.168.100.3
Mar 14 09:30:22 192.168.100.3
Mar 14 09:30:22 192.168.100.3
Mar 14 09:30:22 192.168.100.3
Mar 14 09:30:22 192.168.100.3 [mgcam] emm thread started
Mar 14 09:30:22 192.168.100.3 got 56 cmd 9F
Mar 14 09:30:22 192.168.100.3 [mg0] namespace 820000 t-id 157C on-id 13E
Mar 14 09:30:22 192.168.100.3 [mg0] descramble on 1, source 0
Mar 14 09:30:22 192.168.100.3 [mg0] service 144 index 0 pmt pid 117 (1), pids: video 0x0204, audio 0x0244 0x02B2
Mar 14 09:30:22 192.168.100.3 CaPID: 0x05EC ProvID: 000000
Mar 14 09:30:22 192.168.100.3 [mg0] No ******* key(s) found for id 604 keynr 06
Mar 14 09:30:22 192.168.100.3 [mg0] network can't decode
Mar 14 09:30:22 192.168.100.3 [mg0] No ******* key(s) found for id 604 keynr 06
Mar 14 09:30:22 192.168.100.3 [mg0] network can't decode
Mar 14 09:30:22 192.168.100.3 [mg0] pid 0x05EC failed to decode.
Mar 14 09:30:22 192.168.100.3 [mgcamd] emm started
Mar 14 09:30:22 192.168.100.3 CaPID: 0x0500 ProvID: 000000
Mar 14 09:36:06 192.168.100.3 [mgcamd] signal 15 received
Mar 14 09:36:06 192.168.100.3 [mg0] stoping camd..
Mar 14 09:36:06 192.168.100.3 [mgcamd] emm stopped
Mar 14 09:36:10 192.168.100.3 Mgcamd 1.38c by mixvt, patched by LEO11 on Dez 04 2012
Mar 14 09:36:10 192.168.100.3 [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:1:192.168.100.4:514 Reread:0
Mar 14 09:36:10 192.168.100.3 [mg] Ecm cache time: 15
Mar 14 09:36:10 192.168.100.3 Box type: dbox2
Mar 14 09:36:10 192.168.100.3
Mar 14 09:36:10 192.168.100.3
Mar 14 09:36:10 192.168.100.3
Mar 14 09:36:10 192.168.100.3
Mar 14 09:36:10 192.168.100.3 [mgcam] emm thread started
Mar 14 09:36:11 192.168.100.3 got 56 cmd 9F
Mar 14 09:36:11 192.168.100.3 [mg0] namespace 820000 t-id 157C on-id 13E
Mar 14 09:36:11 192.168.100.3 [mg0] descramble on 1, source 0
Mar 14 09:36:11 192.168.100.3 [mg0] service 144 index 0 pmt pid 117 (1), pids: video 0x0204, audio 0x0244 0x02B2
Mar 14 09:36:11 192.168.100.3 CaPID: 0x05EC ProvID: 000000
Mar 14 09:36:11 192.168.100.3 [mg0] No ******* key(s) found for id 604 keynr 06
Mar 14 09:36:11 192.168.100.3 [mg0] network can't decode
Mar 14 09:36:11 192.168.100.3 [mg0] No ******* key(s) found for id 604 keynr 06
Mar 14 09:36:11 192.168.100.3 [mg0] network can't decode
Mar 14 09:36:11 192.168.100.3 [mg0] pid 0x05EC failed to decode.
Mar 14 09:36:11 192.168.100.3 [mgcamd] emm started
Mar 14 09:36:11 192.168.100.3 CaPID: 0x0500 ProvID: 000000
Mar 14 09:37:19 192.168.100.3 [mgcamd] signal 15 received
Mar 14 09:37:19 192.168.100.3 [mg0] stoping camd..
Mar 14 09:37:19 192.168.100.3 [mgcamd] emm stopped
Mar 14 09:41:36 192.168.100.3 Mgcamd 1.38c by mixvt, patched by LEO11 on Dez 04 2012
Mar 14 09:41:36 192.168.100.3 [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:1:192.168.100.4:514 Reread:0
Mar 14 09:41:36 192.168.100.3 [mg] Ecm cache time: 15
Mar 14 09:41:36 192.168.100.3 Box type: dbox2
Mar 14 09:41:36 192.168.100.3
Mar 14 09:41:36 192.168.100.3
Mar 14 09:41:36 192.168.100.3
Mar 14 09:41:36 192.168.100.3
Mar 14 09:41:36 192.168.100.3 [mgcam] emm thread started
Mar 14 09:41:36 192.168.100.3 got 56 cmd 9F
Mar 14 09:41:36 192.168.100.3 [mg0] namespace 820000 t-id 157C on-id 13E
Mar 14 09:41:36 192.168.100.3 [mg0] descramble on 1, source 0
Mar 14 09:41:36 192.168.100.3 [mg0] service 144 index 0 pmt pid 117 (1), pids: video 0x0204, audio 0x0244 0x02B2
Mar 14 09:41:36 192.168.100.3 CaPID: 0x05EC ProvID: 000000
Mar 14 09:41:36 192.168.100.3 [mg0] No ******* key(s) found for id 604 keynr 06
Mar 14 09:41:36 192.168.100.3 [mg0] network can't decode
Mar 14 09:41:36 192.168.100.3 [mg0] No ******* key(s) found for id 604 keynr 06
Mar 14 09:41:36 192.168.100.3 [mg0] network can't decode
Mar 14 09:41:36 192.168.100.3 [mg0] pid 0x05EC failed to decode.
Mar 14 09:41:36 192.168.100.3 [mgcamd] emm started
Mar 14 09:41:36 192.168.100.3 CaPID: 0x0500 ProvID: 000000

[notari]

and this is later when i install this new mgcamd enigma2-plugin-softcams-mgcamd_1.38-r1_mips32el.ipk 334.76KB


Mar 14 13:28:01 192.168.100.3 [mgcamd] signal 15 received
Mar 14 13:28:01 192.168.100.3 [mg0] stoping camd..
Mar 14 13:28:01 192.168.100.3 [mgcamd] emm stopped
Mar 14 13:28:05 192.168.100.3 Mgcamd v1.38 by mixvt, patched by D2MAC on Oct 23 2011
Mar 14 13:28:05 192.168.100.3 [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:3:192.168.100.4:514 Reread:0
Mar 14 13:28:05 192.168.100.3 [mg] Ecm cache time: 15
Mar 14 13:28:05 192.168.100.3 Box type: mips dreambox (dm7025, dm800)
Mar 14 13:28:06 192.168.100.3
Mar 14 13:28:06 192.168.100.3
Mar 14 13:28:06 192.168.100.3
Mar 14 13:28:06 192.168.100.3
Mar 14 13:28:06 192.168.100.3 [config] newcamd route = ##############
Mar 14 13:28:06 192.168.100.3 newcamd keep alive: 300, incoming port: 21000
Mar 14 13:28:06 192.168.100.3 [mgcam] emm thread started
Mar 14 13:28:06 192.168.100.3 [newcamd] Connecting to mgcamdreceiver.ddns.net:12345...
Mar 14 13:28:10 192.168.100.3 got 98 cmd 9F
Mar 14 13:28:10 192.168.100.3 [mg0] namespace C00000 t-id 2 on-id 85
Mar 14 13:28:10 192.168.100.3 [mg0] descramble on 1, source 0
Mar 14 13:28:10 192.168.100.3 [mg0] service A index 0 pmt pid 65 (1), pids: video 0x01FF, audio 0x0020 0x0200 0x0201 0x0203
Mar 14 13:28:10 192.168.100.3 CaPID: 0x1742 ProvID: 000000
Mar 14 13:28:10 192.168.100.3 CaPID: 0x1842 ProvID: 000000
Mar 14 13:28:10 192.168.100.3 CaPID: 0x1843 ProvID: 000000
Mar 14 13:28:10 192.168.100.3 CaPID: 0x1B42 ProvID: 000000
Mar 14 13:28:10 192.168.100.3 CaPID: 0x1F42 ProvID: 000000
Mar 14 13:28:10 192.168.100.3 CaPID: 0x1A42 ProvID: 000000
Mar 14 13:28:11 192.168.100.3 [mg0] network can't decode
Mar 14 13:28:11 192.168.100.3 [mg0] pid 0x1742 failed to decode.
Mar 14 13:28:11 192.168.100.3 [mg0] network can't decode
Mar 14 13:28:11 192.168.100.3 [mg0] pid 0x1842 failed to decode.
Mar 14 13:28:11 192.168.100.3 [mg0] network can't decode
Mar 14 13:28:11 192.168.100.3 [mg0] pid 0x1843 failed to decode.
Mar 14 13:28:11 192.168.100.3 [mg0] network can't decode
Mar 14 13:28:11 192.168.100.3 [mg0] pid 0x1B42 failed to decode.
Mar 14 13:28:11 192.168.100.3 [mg0] network can't decode
Mar 14 13:28:11 192.168.100.3 [mg0] pid 0x1F42 failed to decode.
Mar 14 13:28:11 192.168.100.3 [mg0] network can't decode
Mar 14 13:28:11 192.168.100.3 [mg0] pid 0x1A42 failed to decode.
Mar 14 13:28:11 192.168.100.3 [mgcamd] emm started
Mar 14 13:28:12 192.168.100.3 CaPID: 0x1000 ProvID: 000000
Mar 14 13:28:12 192.168.100.3 CaPID: 0x1502 ProvID: 000000
Mar 14 13:28:12 192.168.100.3 CaPID: 0x1002 ProvID: 000000
Mar 14 13:28:12 192.168.100.3 CaPID: 0x1002 ProvID: 000000
Mar 14 13:28:12 192.168.100.3 CaPID: 0x1008 ProvID: 000000
Mar 14 13:28:12 192.168.100.3 CaPID: 0x1009 ProvID: 000000
Mar 14 13:28:12 192.168.100.3 CaPID: 0x1008 ProvID: 000000

[kopper]

@notari
No success yet?
be sure you remove the mgcamd from reciever before you put a new one

[notari]

@notari
No success yet?
be sure you remove the mgcamd from reciever before you put a new one

thank's kopper i am sure becouse i flash again my box and install a mgcamd (enigma2-plugin-softcams-mgcamd_1.38-r1_mips32el.ipk 334.76KB ) but i dont now what happens....

[notari]

@notari
No success yet?
be sure you remove the mgcamd from reciever before you put a new one

thank's kopper i am sure becouse i flash again my box and install a mgcamd (enigma2-plugin-softcams-mgcamd_1.38-r1_mips32el.ipk 334.76KB ) but i dont now what happens....

here is my mg_cfg if someone can help

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

[ayanahmed]

Did you try other values for B: {00} because it's very important in proper working of mgcamd. Autodedect works only for original boxes. Check your Sunray 4 is closely cloned to which model and then put its vale for B:

Moreover did you check your /tmp directry this file "mgstat.info" what does it speaks of. Similarly this "mgshare.info" will show your line offline or online.

[notari]

Did you try other values for B: {00} because it's very important in proper working of mgcamd. Autodedect works only for original boxes. Check your Sunray 4 is closely cloned to which model and then put its vale for B:

Moreover did you check your /tmp directry this file "mgstat.info" what does it speaks of. Similarly this "mgshare.info" will show your line offline or online.

yes i try and 06

[ayanahmed]

Did you try other values for B: {00} because it's very important in proper working of mgcamd. Autodedect works only for original boxes. Check your Sunray 4 is closely cloned to which model and then put its vale for B:

Moreover did you check your /tmp directry this file "mgstat.info" what does it speaks of. Similarly this "mgshare.info" will show your line offline or online.

yes i try and 06

In which directory your config files are:
i.e., /var/keys or /usr/keys
according to your mg_cfg file these should be in /var/keys

[notari]

Did you try other values for B: {00} because it's very important in proper working of mgcamd. Autodedect works only for original boxes. Check your Sunray 4 is closely cloned to which model and then put its vale for B:

Moreover did you check your /tmp directry this file "mgstat.info" what does it speaks of. Similarly this "mgshare.info" will show your line offline or online.

yes i try and 06

In which directory your config files are:
i.e., /var/keys or /usr/keys
according to your mg_cfg file these should be in /var/keys

is in usr/keys

[kopper]

@notari
as I told you before after I had many trouble to connect to server with my old Mgcamd ,I installed my new mgcamd dirct from my decoder VU+ with plugin =Tspanel and I just put mgcamdreciever line in newcamd list and it works good
when I looked at my mg.cfg it is like this>>>
M (02)
C (02)
A (01)
U (01)
T (00)
G (01)
N (07)
K (02)
Q (10)
P (00)
O (00)
S (03)
L (02)
E (15)
H (00)
R (04)
D (11)
B (00)
F (00)
It was like that when I installed mgcamd, the line connected , So I did not touch anything
Cannot tell you if it works for you like that, but you can try ,
take note what you have now to be sure