Signal accessing issue @95*E

[addee]

Hi
I am using same finder and receiver hyper 2000
I have issue with 11090 h 30000 and 11510 h 30000
May dual output lnb use kar raha hon
Full 95e 100% on 4 feet received hota hai
Meray pass 2 starsat receiver hain akk may company software hai jis may 22khz ka on off ka option hai or dosray may koi or software hai jiss may auto ka bhi option hai
Auto walay pay all frequency ok received hoti hain jab k on walay saari received nahi hoti
Itni tafseel batanay ka maqsad ye hai k app 22khz ko auto kar k dekhoo

Regards
Adeel

[Umair Malik]

Hi
I am using same finder and receiver hyper 2000
I have issue with 11090 h 30000 and 11510 h 30000
May dual output lnb use kar raha hon
Full 95e 100% on 4 feet received hota hai
Meray pass 2 starsat receiver hain akk may company software hai jis may 22khz ka on off ka option hai or dosray may koi or software hai jiss may auto ka bhi option hai
Auto walay pay all frequency ok received hoti hain jab k on walay saari received nahi hoti
Itni tafseel batanay ka maqsad ye hai k app 22khz ko auto kar k dekhoo

Regards
Adeel

Yes this looks true

[Masood]

Yes this looks true

satellite finder peh koee aisa switch naheen hota .....signals appears on roof but disappears in room
I'm sure ,I need to change the coaxial cable once again .......the root of cable from roof to room is very complicated

[addee]

Yes this looks true

satellite finder peh koee aisa switch naheen hota .....signals appears on roof but disappears in room
I'm sure ,I need to change the coaxial cable once again .......the root of cable from roof to room is very complicated

Cable change karnay say i think problem solve nahi hoga
App receiver direct oper hee laga k dekh loo warna sab zaya jayay ga
Umair bhai nay bhi cofirm kar diya hai ju may keh raha tha baki app ki marzi

[chazer]

Auto walay pay all frequency ok received hoti hain jab k on walay saari received nahi hoti
Itni tafseel batanay ka maqsad ye hai k app 22khz ko auto kar k dekhoo

The reason behind this is Local oscillator freq witch changes from 9.75GHz to 10.60GHz on detection of 22kHz in Universal type KU LNB and this function perform by the receiver autometically.
If other Tps of above 12GHz faces the same problem then it could be due to lac of 22kHz signal approaching LNB but as Mr Masood said only 12170 is effected doesn't make sense.

[Masood]

The reason behind this is Local oscillator freq witch changes from 9.75GHz to 10.60GHz on detection of 22kHz in Universal type KU LNB and this function perform by the receiver autometically.If other Tps of above 12GHz faces the same problem then it could be due to lac of 22kHz signal approaching LNB but as Mr Masood said only 12170 is effected doesn't make sense.

I agreed to your logics ..what do you recommend to solve my issue? is there any switch works to boost the signals ?

[Umair Malik]

Try These Settings in your receiver's installation menu

Keep 22khz auto
Lnb universal
Power 13/18

[Masood]

Try These Settings in your receiver's installation menu

sat finder ko be zehn mein rukhain and what will be its setting
rest all TP's signals are accessing except 12170.....NO issue of polarity as well.....few H polarity TP's signals are fine
today I will cross check b4 cable routing......may be the problem comes during cable routing

[Dr.Timor]

butt saab Mera bhe NSS6 signal ka issue tha pher mai Cox cable change kar deya problem teek hogaya agar Lahore meh russia ya iran made ka wire mil jaye to bhut acha hoga

[Masood]

butt saab Mera bhe NSS6 signal ka issue tha pher mai Cox cable change kar deya problem teek hogaya agar Lahore meh russia ya iran made ka wire mil jaye to bhut acha hoga

here in local market only china copper coaxial cable is available and that is already checked earlier .
aap nay kub aana hay ?Torkhum border completely khul chuka hay .....meray liay Russian taar ka aik roll lay aana