WHAT IS FINAL SOLUTION FOR SPARK 7162 BOOT PROBLEM

[Athart]

Mjhe lagta he aap ne ye command di he
set load_addr 0^80000000


Mene apne receiver ko ye command di thi
set load_addr 80000000

set load_addr 80000000 is sa kiyya ha

Ta ke rescue ho jae aur loading USB se ho.

[saad]

Mjhe lagta he aap ne ye command di he
set load_addr 0^80000000


Mene apne receiver ko ye command di thi
set load_addr 80000000

set load_addr 80000000 is sa kiyya ha

Ta ke rescue ho jae aur loading USB se ho.

PDK7105> set load _addr 0*80000000

PDK7105> save comannad works
ok i did image v 1.2.74 ok with my box through lan Cisco TFTP Server now if u have latest plugin included all latest cams post here in stepwise method thanks

[Athart]

ok i did image v 1.2.74 ok with my box through lan Cisco TFTP Server now if u have latest plugin included all latest cams post here in stepwise method thanks

Congrats

Es image me Fast Cams aur Configurations hen. Es ko download kr ke var folder ko DCC ke through apne receiver me shift krdo.

download/file.php?id=63134

Aur lan Cisco TFTP Server software aur uska ka full method bhi yahan post krdo.

[saad]

ok here is the method
"The method of work"

1- We make sure that the usb to rs232 id on the computer and know its port number


2- We connect the receiver to the computer by cable with the link and shut down the device from the back

3- We open the hyperterminal after installing it and follow the next steps very carefully (the port number and settings in the following image) and then click OK

Bit per second = 115200
Data bits = 8
Parity = None
Stops bits = 1
Flow controll = None

jo port app ka ha wo put karoo

5- Click the menu button on the receiver and open the receiver from the back. The writing will appear in the loader as shown in the image


jab save jayya tu phir lan ip ap computer lan par 192.168.40.19 and
Cisco TFTP Server ko open kar lana ha phir receiver on karo ok button hold par phir forc on nscreen voloume up buton to connect ho jayya ga 6 to 10 mitues ma ho ga process ok both file i attached work on window 10 ok

[Athart]

ok here is the method
"The method of work"

1- We make sure that the usb to rs232 id on the computer and know its port number

2- We connect the receiver to the computer by cable with the link and shut down the device from the back

3- We open the hyperterminal after installing it and follow the next steps very carefully (the port number and settings in the following image) and then click OK

Bit per second = 115200
Data bits = 8
Parity = None
Stops bits = 1
Flow controll = None

jo port app ka ha wo put karoo

5- Click the menu button on the receiver and open the receiver from the back. The writing will appear in the loader as shown in the image

jab save jayya tu phir lan ip ap computer lan par 192.168.40.19 and
Cisco TFTP Server ko open kar lana ha phir receiver on karo ok button hold par phir forc on nscreen voloume up buton to connect ho jayya ga 6 to 10 mitues ma ho ga process ok both file i attached work on window 10 ok

Good Work, Well Done

[first khan]

I made rescue through this method