Need help for running powervu channels on hyper 2000 (15 serial)
thx
Help for powervu solution for hyper 2000
- asimaslam74
- Registered Member
- Posts: 480
- Joined: 23 May 2014, 8:01 pm
- Location: Quetta
- Has thanked: 140 times
- Been thanked: 195 times
- Contact:
- asimaslam74
- Registered Member
- Posts: 480
- Joined: 23 May 2014, 8:01 pm
- Location: Quetta
- Has thanked: 140 times
- Been thanked: 195 times
- Contact:
- Shahid Geo
- Moderator
- Posts: 9897
- Joined: 16 Jun 2013, 9:51 pm
- Has thanked: 6409 times
- Been thanked: 3208 times
-
- Registered Member
- Posts: 142
- Joined: 17 Jan 2015, 8:49 pm
- Has thanked: 4 times
- Been thanked: 35 times
- Contact:
Re: Help for powervu solution for hyper 2000
Dear Friends Powervu working on 2000 Hyper serial 15. I have Serial 15 hyper and till date working. It is tricky to run and some times corrupted after some days working. Again it takes 20-30 minutes to work again. Please care day time specially to be connected with net because hyper s/w confirms their server active or expired. It expired it corrupts powervu emulators. Any way I again share how to activate powervu on serial 15 hypers. For the purpose u have always some tools stored in usb device. The process is complicated first time but again easy to activate by USB easily.
Tools. 1. RS 232 Cable.
2. Hyper Dump File of any old s/w.
3. s/w 2.03
4. s/w 2.28 ( it is last version which makes dump file on USB.)
5. Kamal hh final down grade.( A master s/w for all changes)
Procedure.Easy Process with USB only.( disconnect net during all process)
1. Copy ur channel file on USB.
2. Install 2.28 Version on receiver by USB
3. Make dump file of this s/w on USB( 8 MB file will be generated)
4.Install version 2.03, 2.05 ( Any one)
5. Istall kamal hh final downgrade.
6. Again install dump file generated on s/w 2.28, goto 105 east cartoon network channels it should work if not working load new powerrvu/softcam file and run powervu Cartoon network channels.
7. Install any latest s/w i.e 2.50 All powervu will be ok including sony channels.
8. Keep in mind net should be disconnected during all process.
9. When powervu OK connect net and enjoy all.
Tools. 1. RS 232 Cable.
2. Hyper Dump File of any old s/w.
3. s/w 2.03
4. s/w 2.28 ( it is last version which makes dump file on USB.)
5. Kamal hh final down grade.( A master s/w for all changes)
Procedure.Easy Process with USB only.( disconnect net during all process)
1. Copy ur channel file on USB.
2. Install 2.28 Version on receiver by USB
3. Make dump file of this s/w on USB( 8 MB file will be generated)
4.Install version 2.03, 2.05 ( Any one)
5. Istall kamal hh final downgrade.
6. Again install dump file generated on s/w 2.28, goto 105 east cartoon network channels it should work if not working load new powerrvu/softcam file and run powervu Cartoon network channels.
7. Install any latest s/w i.e 2.50 All powervu will be ok including sony channels.
8. Keep in mind net should be disconnected during all process.
9. When powervu OK connect net and enjoy all.
- asimaslam74
- Registered Member
- Posts: 480
- Joined: 23 May 2014, 8:01 pm
- Location: Quetta
- Has thanked: 140 times
- Been thanked: 195 times
- Contact:
Re: Help for powervu solution for hyper 2000
thx bro for your helpadeel218 wrote: ↑11 Jun 2019, 11:13 am Dear Friends Powervu working on 2000 Hyper serial 15. I have Serial 15 hyper and till date working. It is tricky to run and some times corrupted after some days working. Again it takes 20-30 minutes to work again. Please care day time specially to be connected with net because hyper s/w confirms their server active or expired. It expired it corrupts powervu emulators. Any way I again share how to activate powervu on serial 15 hypers. For the purpose u have always some tools stored in usb device. The process is complicated first time but again easy to activate by USB easily.
Tools. 1. RS 232 Cable.
2. Hyper Dump File of any old s/w.
3. s/w 2.03
4. s/w 2.28 ( it is last version which makes dump file on USB.)
5. Kamal hh final down grade.( A master s/w for all changes)
Procedure.Easy Process with USB only.( disconnect net during all process)
1. Copy ur channel file on USB.
2. Install 2.28 Version on receiver by USB
3. Make dump file of this s/w on USB( 8 MB file will be generated)
4.Install version 2.03, 2.05 ( Any one)
5. Istall kamal hh final downgrade.
6. Again install dump file generated on s/w 2.28, goto 105 east cartoon network channels it should work if not working load new powerrvu/softcam file and run powervu Cartoon network channels.
7. Install any latest s/w i.e 2.50 All powervu will be ok including sony channels.
8. Keep in mind net should be disconnected during all process.
9. When powervu OK connect net and enjoy all.
i need 2.03 version plus how to make dump file process? can you also upload "new powerrvu/softcam file"
- asimaslam74
- Registered Member
- Posts: 480
- Joined: 23 May 2014, 8:01 pm
- Location: Quetta
- Has thanked: 140 times
- Been thanked: 195 times
- Contact:
Re: Help for powervu solution for hyper 2000
Bro sub kar ke dekh liya 2.28 pe asiasat 105 pe cartoon tv work karta hai aur 68e pe HBO but jab software ko 2.46 or 2.50 pe update karo tu phir koi bhi powervu nai chalta, keys delete bhi ki manual bhi dali but work nai karta
any whats wrong?
-
- Registered Member
- Posts: 142
- Joined: 17 Jan 2015, 8:49 pm
- Has thanked: 4 times
- Been thanked: 35 times
- Contact:
Re: Help for powervu solution for hyper 2000
Yar it is all hit n trial . Main na bhi buht try ki aakhir ye wala solution nikala. now it works mostly 4 me. Asa kren aap after final downgrade koi alternative s/w kr len phr dobara 2.28 wali dump phr latest s/w kren but in all steps net disconnected. I am till date seeing sony 105 on serial 15 hyper
Who is online
Users browsing this forum: Apple, Bing, Google, Google Adsense, monikabansal, Semrush and 304 guests