Ncam 9.4
-[ncam] Better solution for setting CBC mode for CSA
(Instead of hard coding the algo mode in the dvbapi_write_cw(), we now initialize the er->cw_ex variable with the proper value)
-Simpler code for the EXTENDED_CW struct
-[ncam] Renamed caid_is_biss_static() to caid_is_biss_fixed()
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
ncam update's here
-
- Registered Member
- Posts: 208
- Joined: 13 Jan 2014, 11:04 pm
- Has thanked: 7 times
- Been thanked: 17 times
- m_saleeM
- Gold Contributor
- Posts: 1291
- Joined: 16 Dec 2013, 1:26 am
- Location: Sialkot (PAK) Kuwait
- Has thanked: 9 times
- Been thanked: 45 times
Re: ncam update's here
Ncam 9.5
-[powervu] Added support for hash mode 32
-[director] Fixed cw checksum bytes for nano EE
-[DVBAPI] 128 bit keys
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
-[powervu] Added support for hash mode 32
-[director] Fixed cw checksum bytes for nano EE
-[DVBAPI] 128 bit keys
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
- m_saleeM
- Gold Contributor
- Posts: 1291
- Joined: 16 Dec 2013, 1:26 am
- Location: Sialkot (PAK) Kuwait
- Has thanked: 9 times
- Been thanked: 45 times
Re: ncam update's here
9.7
9.7
-Rework on dvbapi to incrase the amount of descramblers
-Support for DVB-CISSA scrambling algorithm and 16 byte CWs
Get available descramblers in box and BISS2 related changes
* Instead of using a predefined number of descramblers (16 until now), oscam now gets the exact number of available descramblers in box.
* Skip cw checks for BISS2, similar to what is done for BISS1. BISS2 uses 16 byte cw, so some checks need to be skipped.
* Cosmetic changes including code refactoring, variable renaming and comment addition to several places.
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
9.7
-Rework on dvbapi to incrase the amount of descramblers
-Support for DVB-CISSA scrambling algorithm and 16 byte CWs
Get available descramblers in box and BISS2 related changes
* Instead of using a predefined number of descramblers (16 until now), oscam now gets the exact number of available descramblers in box.
* Skip cw checks for BISS2, similar to what is done for BISS1. BISS2 uses 16 byte cw, so some checks need to be skipped.
* Cosmetic changes including code refactoring, variable renaming and comment addition to several places.
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
- m_saleeM
- Gold Contributor
- Posts: 1291
- Joined: 16 Dec 2013, 1:26 am
- Location: Sialkot (PAK) Kuwait
- Has thanked: 9 times
- Been thanked: 45 times
Re: ncam update's here
Ncam 9.8
-Add support dvbcissa-biss2
-Increased max demux to 32 and max filters to 64
-Decreased max ecm pids to 16 and emm pids to 16
-Decreased max stream indices to 8
-[dvbapi] Increased MAX_STREAM_INDICES back to 32
(It should be equal to MAX_STREAM_PIDS or else it creates problems with specific powervu channels. A better solution (with will also result in even lower number of descramblers needed for powervu channels) will be added in the future)
-[nemu] Dropped drecrypt & videoguard module
(No channel uses it anymore)
-fix bug in disablecrccws_only_for
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
-Add support dvbcissa-biss2
-Increased max demux to 32 and max filters to 64
-Decreased max ecm pids to 16 and emm pids to 16
-Decreased max stream indices to 8
-[dvbapi] Increased MAX_STREAM_INDICES back to 32
(It should be equal to MAX_STREAM_PIDS or else it creates problems with specific powervu channels. A better solution (with will also result in even lower number of descramblers needed for powervu channels) will be added in the future)
-[nemu] Dropped drecrypt & videoguard module
(No channel uses it anymore)
-fix bug in disablecrccws_only_for
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
- m_saleeM
- Gold Contributor
- Posts: 1291
- Joined: 16 Dec 2013, 1:26 am
- Location: Sialkot (PAK) Kuwait
- Has thanked: 9 times
- Been thanked: 45 times
Re: ncam update's here
9.9
-[nemu] Pass complete rdr structure to emu_process_ecm()
(Also re-ordered arguments in powervu_ecm())
-remove duplicate debug dump of er->ecm
-fix bug in disablecrccws_only_for also in cacheex
-general disable checksum correction code optimization
-[powervu] Added new method for matching ECM and EMM keys
(Read the wiki for instructions on how to use it: https://github.com/oscam-emu/oscam-patc ... --may-2019
This method is based on enigma2 namespace and it is only available for enigma2 and Tvheadend/VDR software for PC. Also, it does not work with stream relay)
-[dvbapi] Fix for stapi, coolapi, etc
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
-[nemu] Pass complete rdr structure to emu_process_ecm()
(Also re-ordered arguments in powervu_ecm())
-remove duplicate debug dump of er->ecm
-fix bug in disablecrccws_only_for also in cacheex
-general disable checksum correction code optimization
-[powervu] Added new method for matching ECM and EMM keys
(Read the wiki for instructions on how to use it: https://github.com/oscam-emu/oscam-patc ... --may-2019
This method is based on enigma2 namespace and it is only available for enigma2 and Tvheadend/VDR software for PC. Also, it does not work with stream relay)
-[dvbapi] Fix for stapi, coolapi, etc
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
- m_saleeM
- Gold Contributor
- Posts: 1291
- Joined: 16 Dec 2013, 1:26 am
- Location: Sialkot (PAK) Kuwait
- Has thanked: 9 times
- Been thanked: 45 times
Re: ncam update's here
Ncam 10.0
-[streamserver + powervu] Use the new key method here as well
(We can get the tsid, onid and ens values from the service reference, so this is possible after all)
-Cosmetics to log messages
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
-[streamserver + powervu] Use the new key method here as well
(We can get the tsid, onid and ens values from the service reference, so this is possible after all)
-Cosmetics to log messages
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
- m_saleeM
- Gold Contributor
- Posts: 1291
- Joined: 16 Dec 2013, 1:26 am
- Location: Sialkot (PAK) Kuwait
- Has thanked: 9 times
- Been thanked: 45 times
Re: ncam update's here
Ncamn 12.2
CODE]
-fix MODULE CONSTCW
-fix webif save issue with high var count
[/CODE
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
CODE]
-fix MODULE CONSTCW
-fix webif save issue with high var count
[/CODE
http://www.mediafire.com/file/j8oydmwse ... am.sh4.zip
Who is online
Users browsing this forum: Ahrefs [Bot], Apple, Claude, Google and 6 guests