DM520 Ncam Problem On Videocon D2H

User avatar
Shahid Geo
Moderator
Moderator
Posts: 9897
Joined: 16 Jun 2013, 9:51 pm
Has thanked: 6409 times
Been thanked: 3208 times

DM520 Ncam Problem On Videocon D2H

#21



Post by Shahid Geo »

alis4u wrote: 05 Feb 2018, 3:33 pm Friends Please tell me how to buy cn.smartcam.fun account for my d2h videocon activation
use kingsat line
gsarwar55
Registered Member
Registered Member
Posts: 32
Joined: 08 Apr 2014, 2:19 pm
Contact:

DM520 Ncam Problem On Videocon D2H

#22



Post by gsarwar55 »

Videocon open only oscam 11532
User avatar
Masood
Vip
Vip
Posts: 3461
Joined: 17 Jan 2015, 4:19 pm
Location: Lahore
Has thanked: 799 times
Been thanked: 1070 times
Contact:

Re: DM520 Ncam Problem On Videocon D2H

#23



Post by Masood »

NCam 7.1 is working fine with 88* vid'con ,,,zapping comparatively slower than FTA channels
DM 900 UltraHD
800HDse SIM2.10
OpenBox AS4K CI Pro
safone
Registered Member
Registered Member
Posts: 5
Joined: 24 Jan 2018, 9:56 am
Contact:

Re: DM520 Ncam Problem On Videocon D2H

#24



Post by safone »

As per i know..port 6661 is for cccam..andbport 7771 is for newcamd..
tech1010
Junior Member
Junior Member
Posts: 3
Joined: 22 Jun 2016, 7:25 pm
Contact:

Re: DM520 Ncam Problem On Videocon D2H

#25



Post by tech1010 »

Mine 6661 port for cn.smartcam.fun dreambox 800se v2 pr nai chal rhi... Pls koi mera respected member bta k cam issue hai jn koi or
User avatar
taree
Senior Registered Member
Senior Registered Member
Posts: 894
Joined: 01 Aug 2013, 3:32 pm
Has thanked: 686 times
Been thanked: 417 times
Contact:

Re: DM520 Ncam Problem On Videocon D2H

#26



Post by taree »

use oscam any version
and post oscam.server and oscam.config files here
will edit it for u to work videocon.
in dm800se videocon working smoothly.no issues
VU ZERO 4K
WETEKPLAY2
SAMSUNG 40K5000
User avatar
Masood
Vip
Vip
Posts: 3461
Joined: 17 Jan 2015, 4:19 pm
Location: Lahore
Has thanked: 799 times
Been thanked: 1070 times
Contact:

Re: DM520 Ncam Problem On Videocon D2H

#27



Post by Masood »

taree wrote: 16 Dec 2018, 9:32 am use oscam any version
and post oscam.server and oscam.config files here
will edit it for u to work videocon.
in dm800se videocon working smoothly.no issues
the issue is not so ,figured by you@taree..........encrypted channel opening time takes few seconds(5-8sec.) to open.
DM 900 UltraHD
800HDse SIM2.10
OpenBox AS4K CI Pro
RiJordy
Registered Member
Registered Member
Posts: 90
Joined: 23 Oct 2018, 8:40 pm
Has thanked: 567 times
Been thanked: 47 times
Contact:

Re: DM520 Ncam Problem On Videocon D2H

#28



Post by RiJordy »

Try adding the following line to the reader in oscam.server, it'll quite possibly improve the zapping speed.

Code: Select all

caid = 0639
d2h is simulcrypting all the channels with 4 CAIDs. This seems to make OScam take some time to figure out which CAID from the server can be used. Note that this will restrict the clearing of channels to d2h at 88E. If you want Dish TV 93.5E/95E to work with the same reader, modify the line in the following manner. This might again deteriorate the zapping speed a bit though!

Code: Select all

caid = 0639,0b00
User avatar
Masood
Vip
Vip
Posts: 3461
Joined: 17 Jan 2015, 4:19 pm
Location: Lahore
Has thanked: 799 times
Been thanked: 1070 times
Contact:

Re: DM520 Ncam Problem On Videocon D2H

#29



Post by Masood »

[reader]
label = myemulator
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1

[reader]
label = myconstantcw
enable = 0
protocol = constcw
device = /var/keys/constant.cw
cacheex = 0
cacheex_maxhop = 0
cacheex_allow_request = 0
group = 1
dropbadcws = 0
disablecrccws = 0

[reader]
label = emulator
protocol = emu
device = emulator
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

####################### CCcam ############################
[reader]
label = server1
enable = 1
protocol = cccam
device = cn.smartcam.fun,06663
user =xxxxx
password = ps6k
group = 1
cccversion = 2.0.11
cccmaxhops = 2
ccckeepalive = 1
audisabled = 1
disablecrccws = 1
#disablecrccws_only_for = 0500:032830,042820,030B00;1811:003311,003315;0100:003311
caid =0639
####################### Ncamed ############################

[reader]
label = cn.smartcam.fun
enable = 1
protocol = newcamd
device = rem cn.smartcam.fun,07771
key = 0102030405060708091011121314
user = xxxir35w
password = xxxps3k
fallback = 1
group = 1
disablecrccws = 1
####################### Gbox ############################

[reader]
label = server3
enable = 0
protocol = gbox
mg-encrypted = D: { 192.168.0.4 { 12345 34567 { ABCD1234 { 9 9 }}}}
group = 3
caid = 0300

after inserting the parameters caid=0639 the "line" stopped working :roll:
DM 900 UltraHD
800HDse SIM2.10
OpenBox AS4K CI Pro
User avatar
taree
Senior Registered Member
Senior Registered Member
Posts: 894
Joined: 01 Aug 2013, 3:32 pm
Has thanked: 686 times
Been thanked: 417 times
Contact:

Re: DM520 Ncam Problem On Videocon D2H

#30



Post by taree »

RiJordy wrote: 16 Dec 2018, 12:58 pm Try adding the following line to the reader in oscam.server, it'll quite possibly improve the zapping speed.

Code: Select all

caid = 0639
method did not work .
VU ZERO 4K
WETEKPLAY2
SAMSUNG 40K5000
Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No User AvatarAhrefs [Bot], User avatarApple, User avatarGoogle Adsense and 153 guests