DM-800seV2 460MHz mod
Posted: 05 Apr 2014, 12:23 pm
DM-800seV2 460MHz mod
It's possible to run your dm800seV2 at 460MHz instead of the default 400MHz.
All you need to do is move a resistor (R1818) from the bottom side of the mainboard to an empty resistor spot (R1819) at the top of the mainboard.
Please note, you need to have good soldering skills and preferable 2 small soldering irons to remove the resistor, of course smd soldering equipment would be ideal !
I am not responsible for any damage done to the Dreambox by this modification
Pre mod:
top
The little red cricle is R1819
bottom
Post mod:
top
bottom
It's possible to run your dm800seV2 at 460MHz instead of the default 400MHz.
All you need to do is move a resistor (R1818) from the bottom side of the mainboard to an empty resistor spot (R1819) at the top of the mainboard.
Please note, you need to have good soldering skills and preferable 2 small soldering irons to remove the resistor, of course smd soldering equipment would be ideal !
I am not responsible for any damage done to the Dreambox by this modification
Pre mod:
top
The little red cricle is R1819
bottom
Code: Select all
root@dm800sev2:~# cat /proc/cpuinfo
system type : BCM7413B1 STB platform
processor : 0
cpu model : Brcm4380 V4.4 FPU V0.1
BogoMIPS : 403.45
cpu MHz : 405.013
Post mod:
top
bottom
Code: Select all
root@dm800sev2:~# cat /proc/cpuinfo
system type : BCM7413B1 STB platform
processor : 0
cpu model : Brcm4380 V4.4 FPU V0.1
BogoMIPS : 456.70
cpu MHz : 459.017