Golden Multimedia Forum

Starsat SR-2000 Extreme Softwares Till 18 January 2020

Total SW's (51)

V2.01 [13 July 2017]
V2.09 [22 November 2017]
V2.10 [4 December 2017]
V2.11 [8 December 2017]
V2.12 [12 December 2017]
V2.12 [16 December 2017]
V2.13 [27 December 2017]
V2.14 [4 January 2018]
V2.15 [11 January 2018]
V2.16 [21 January 2018]
V2.17 [22 January 2018]
V2.18 [29 January 2018]
V2.19 [8 March 2018]
V2.20 [28 March 2018]
V2.22 [24 April 2018]
V2.23 [28 April 2018]
V2.25 [15 May 2018]
V2.26 [16 May 2018]
V2.28 [12 June 2018]
V2.29 [14 June 2018]
V2.30 [19 June 2018]
V2.31 [21 June 2018]
V2.32 [9 July 2018]
V2.33 [21 July 2018]
V2.35 [24 August 2018]
V2.36 [1 September 2018]
V2.37 [15 October 2018]
V2.38 [23 October 2018]
V2.39 [19 November 2018]
V2.41 [17 December 2018]
V2.42 [21 December 2018]
V2.43 [26 December 2018]
V2.45 [30 December 2018]
V2.47 [12 January 2019]
V2.49 [12 January 2019]
V2.50 [6 February 2019]
V2.50 [7 February 2019]
V2.52 [23 February 2019]
V2.53 [08 March 2019]
V2.54 [01 April 2019]
V2.55 [29 May 2019]
V2.56 [13 June 2019]
V2.57 [18 June 2019]
V2.58 [13 July 2019]
V2.59 [10 September 2019]
V2.61 [29 September 2019]
V2.63 [24 October 2019]
V2.64 [18 November 2019]
V2.65 [20 November 2019]
V2.68 [27 December 2019]
V2.70 [04 January 2020]
V2.71 [18 January 2020]

Boot Stuck Solution For Starsat 2000 Extreme
(Which Happens In Case Of Electricity Fail While Installing Software)





*Download The Boot Solution .rar File
*The USB Should Be FAT32 With Nothing Else In It.
*Extract The Boot Solution.rar And Copy The Folder ''files'' in the USB (It Won't Work In Case If You Copy GxRom.bin In USB)
*Connect The USB To The Back Port Of The Receiver (Receiver Should Be Turned Off From The Back Power Button)
*Now Press The Standby Button From The Front Panel Of The Receiver (And Also Turn On The Receiver From The Back Power Button) Until A SW Upgrade Menu Occurs The Receiver Shall Reboot After This SW Installation Process

How To Make Channel Data Backup In Starsat-SR 2000 Extreme

-Connect USB To Receiver
-Press Menu Button From Remote
-Go To USB Control
-Go To USB Menu
-Press Yellow Button
-Press OK On Upload Channel List

It Will Make A Channel Data Back Up In Your USB (GX_HD_DatabaseV1.00_1.sdx)


How To Make Key Data [Softcam] Backup In Starsat-SR 2000 Extreme

-Connect USB To Receiver
-Press Menu Button From Remote
-Go To USB Control
-Go To USB Menu
-Press Yellow Button
-Press OK On Upload Key To USB

It Will Make A Key Data [Softcam] Back Up In Your USB

Shortcut Keys For Starsat-SR 2000 Extreme

F1+000= Patch Menu Enable/Disable
F1+111= RS 232 Mode
F1+777= SW info/Model Info/ SN
Page Up= CAID Menu
Page Down= Biss Key Edit Menu

For Color Setting In Starsat-SR 2000 Extreme

Press 0 From Remote

Fixing The Issue Of Signal Loss On Dish TV HD



-Install Latest SW
-After That Do A Factory Default (All)
-After Doing The Factory Default Instantly Tune Dish TV HD (Need To Check Whether Forever Server Is Active Or Not)
-If Dish TV HD Is Now Not Doing Signal Loss And Opens In 20-23 Sec Then You Are Good To Go (In My Case I Had To Do That 3 Times)
-If It Stil Does Signal Loss Issue Then You Will Have To Keep On Doing The Procedure Until Signal Loss Hasn't Disappeared

Loader For Starsat 2000 Extreme

Keep These Settings

Fixing The Issue Of Youtube Not Working

P.S You Will Need Internet Services For It.


-Press Menu Button From Remote
-Go To Network Applications
-Go To Page Number Two
-Select Network Update
-Select Youtube CFG File Here

Flash Dump File For Starsat 2000 Extreme (16 MB)

How To Make Flash Dump File/Back-Up In Starsat-SR 2000 Extreme


-Connect USB To Receiver
-Press Menu Button From Remote
-Go To USB Control
-Go To USB Menu
-Press ''0943128'' From Remote
-It Will Make A Flash Dump File/Back-Up With A Size Of 16MB In Your USB
-You Can Inject This File Via Flash Programmer From Technician In To IC/Flash In Case You Receiver's Flash Gets Damaged



Here Are Few Snaps