Good News! More Progress on PowerVu on Enigma2

User avatar
engineerkhan15
Registered Member
Registered Member
Posts: 362
Joined: 05 Sep 2013, 4:51 pm
Has thanked: 5 times
Been thanked: 140 times
Contact:

Good News! More Progress on PowerVu on Enigma2

#1



Post by engineerkhan15 »

Brothers,
It is very encouraging news that latest changes in Oscam Emu now support opening of PowerVu channels in Enigma2 through Relay Stream. But for this only those receivers will be suitable which have powerfull cpu, like Vu+ Solo2, Duo2 or Dreambox DM800SE V2 etc.
Wait for more update.
Zgemma H5 Combo (DVB-S2 & DVB-C/T2) Enigma2 Receiver
Vu+ Solo SE V2 Enigma2 Receiver
KI Pro 4K Android/Enigma2 Combo (DVB-S2 & DVB-C/T2) Receiver
Amiko Alien 2 (Spark7162) Dual Boot Receiver
Starsat SR-2000 HD Hyper
6 Feet Eurostar Dish
jehanzaib
Registered Member
Registered Member
Posts: 107
Joined: 08 Apr 2014, 10:41 pm
Location: sindh hyderabad
Been thanked: 5 times
Contact:

Re: Good News! More Progress on PowerVu on Enigma2

#2



Post by jehanzaib »

dear agar ap ke pass file hai to send me i have dm800sev2.
regards
User avatar
engineerkhan15
Registered Member
Registered Member
Posts: 362
Joined: 05 Sep 2013, 4:51 pm
Has thanked: 5 times
Been thanked: 140 times
Contact:

Re: Good News! More Progress on PowerVu on Enigma2

#3



Post by engineerkhan15 »

OK, here are more details of the procedure with the links of new Oscam Emu for Dreambox and Vu+ Enigma2 Images (OE 1.6, OE 2.0 & Pli versions):
(see post no. 4 for tested and working files)
As discussed earlier for the time being it is possible through Stream Relay process. The stream relay needs a fast CPU. Not every STB is fast enough. For example, CPU usage on VU+ Duo2 for SD Channel 5% & for HD Channel is 15%.
Everything happens inside the STB, no PC required. Enigma2 streams to oscam-emu, and oscam-emu streams back to Enigma-2. All on the STB. You can watch on Enigma2 directly. You can add the stream URL to your channel list, and directly watch on the E2, too.
How to do settings for PowerVU:
Keys are put into SoftCam.Key, which is placed inside the same folder oscam.conf is (for example /etc/tuxbox/config).
Key format in SoftCam.Key:
P <srvid> <nb> <key>
Example:
P 1234 01 11223344556677
AU keys:
P <srvid> <UA> <key>
Example:
P 1234 11223344 11223344556677
Note:
- For best performance, the "Include ECM in http streams" setting must be enabled. If your image supports it (openpli, openatv), you can find it here: OpenWebif -> Settings -> Customize
- If the setting is not available, you may need to adjust the "ECM fix delay" setting in oscam webif (Config -> Stream Relay). Increase/Lower it until there is no stuttering.
- When using VU+ devices, make sure to use the latest drivers (June 2015), if you encounter any problems.
Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
http://stb:8001/1:0:19:1234:3EF:1:C00000:0:0:0" onclick="window.open(this.href);return false;:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
http://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0" onclick="window.open(this.href);return false;:
5. Add the new stream link to your channel list (for example with DreamBoxEdit)
Note:
- When using DreamBoxEdit:
- A. Go to the list in the middle "Bouquet details".
- B. Right click on a channel, select "IPTV and other streaming services", select "Add".
- C. Select "DVB/TS".
- D. Choose a name and use the new stream link as URL.
- E. Use the "Service ID" of the original channel. You can find it in the left list ("Services").
Important:
Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.
Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
Set Service Type to "1", and enter the correct Service ID for the channel.

But I have not tested it yet because I have Dreambox DM800 HD PVR and at the moment away from my satellite system.
Last edited by engineerkhan15 on 10 Jul 2015, 5:41 pm, edited 2 times in total.
Zgemma H5 Combo (DVB-S2 & DVB-C/T2) Enigma2 Receiver
Vu+ Solo SE V2 Enigma2 Receiver
KI Pro 4K Android/Enigma2 Combo (DVB-S2 & DVB-C/T2) Receiver
Amiko Alien 2 (Spark7162) Dual Boot Receiver
Starsat SR-2000 HD Hyper
6 Feet Eurostar Dish
User avatar
engineerkhan15
Registered Member
Registered Member
Posts: 362
Joined: 05 Sep 2013, 4:51 pm
Has thanked: 5 times
Been thanked: 140 times
Contact:

Re: Good News! More Progress on PowerVu on Enigma2

#4



Post by engineerkhan15 »

Here is the working and tested package for Dreambox and Vu+ receivers:
https://drive.google.com/file/d/0BxND9J ... sp=sharing
Path:
oscam: /usr/bin
oscam config files: /etc/tuxbox/config
But you have to add the working PowerVu keys of desired channels in PowerVu section in the SoftCam.Key file present in the config folder.
Important:
For channel list you must use DreamboxEdit (Dreamset not work) and Service ID must be in Decimal (not in HEX).
For keys:
must be in hex format. if Service ID start with 0, delete it and write it at end of Service ID.
for example if Service ID is 0A28 in keys you put A280.
or 1234 => 2341
or 5678 => 6785
Zgemma H5 Combo (DVB-S2 & DVB-C/T2) Enigma2 Receiver
Vu+ Solo SE V2 Enigma2 Receiver
KI Pro 4K Android/Enigma2 Combo (DVB-S2 & DVB-C/T2) Receiver
Amiko Alien 2 (Spark7162) Dual Boot Receiver
Starsat SR-2000 HD Hyper
6 Feet Eurostar Dish
User avatar
Ghani8856
Senior Registered Member
Senior Registered Member
Posts: 996
Joined: 18 Mar 2014, 4:05 pm
Location: QUETTA,PAKISTAN
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: Good News! More Progress on PowerVu on Enigma2

#5



Post by Ghani8856 »

Dear Can It Work On 2020+ Spark..
Kind Regards
Ghani8856
User avatar
engineerkhan15
Registered Member
Registered Member
Posts: 362
Joined: 05 Sep 2013, 4:51 pm
Has thanked: 5 times
Been thanked: 140 times
Contact:

Re: Good News! More Progress on PowerVu on Enigma2

#6



Post by engineerkhan15 »

ghani8856 wrote:Dear Can It Work On 2020+ Spark..
I have not tested myself but may work if properly patched oscam emu for sh4 is used on Pli image.
Zgemma H5 Combo (DVB-S2 & DVB-C/T2) Enigma2 Receiver
Vu+ Solo SE V2 Enigma2 Receiver
KI Pro 4K Android/Enigma2 Combo (DVB-S2 & DVB-C/T2) Receiver
Amiko Alien 2 (Spark7162) Dual Boot Receiver
Starsat SR-2000 HD Hyper
6 Feet Eurostar Dish
User avatar
nightrider
Senior Registered Member
Senior Registered Member
Posts: 721
Joined: 24 Oct 2013, 4:33 pm
Has thanked: 36 times
Been thanked: 48 times
Contact:

Re: Good News! More Progress on PowerVu on Enigma2

#7



Post by nightrider »

Hi I have Vu+Dou2 and I been using this service for two years I can even stream UHD channel.

Steaming is also working remotely.
|Sony 85" UHD HDR TV |Vu+Dou2 |Etisalat elife 550Mbps |MyHD Card |LG50 Smart 3DTV |LG49 UHD Smart 3DTV | Vu+ Uno4k SE |Vu+uno4k |FireTV stick 4K |
East° 105.5| 95| 68.5| 38| 26| 25.5| 19.2| 13|10| 9| 7|
West° 4| 7| 7.8| 8|
User avatar
Aliraza63
Vip
Vip
Posts: 2769
Joined: 03 Mar 2014, 7:06 pm
Has thanked: 68 times
Been thanked: 197 times
Contact:

Re: Good News! More Progress on PowerVu on Enigma2

#8



Post by Aliraza63 »

I have used the dreambox edited list and oscam svn10888 build patched with the emu and it works but some time it freeze alot at 9 east with my Solo SE but with the same config to oscam web interface, Config - Stream Relay and enter 500 in ECM fix delay setting . it works fine to SOLO2 and VU Ultimo
VU+ Duo4K
VU+ Solo4k
VU+ DUO2(Open Tr 7.02)
Dreambox 920
User avatar
engineerkhan15
Registered Member
Registered Member
Posts: 362
Joined: 05 Sep 2013, 4:51 pm
Has thanked: 5 times
Been thanked: 140 times
Contact:

PowerVu SoftCam file for Oscam Emu

#9



Post by engineerkhan15 »

Here is PowerVu SoftCam for Oscam Emu for use in Enigma2 Receivers:
https://mega.co.nz/#!D5IEEZSK!GjUAf0TYi ... 4vo_LTt9nY

Please check it and give me feedback about it that which package is opening and which not.
Zgemma H5 Combo (DVB-S2 & DVB-C/T2) Enigma2 Receiver
Vu+ Solo SE V2 Enigma2 Receiver
KI Pro 4K Android/Enigma2 Combo (DVB-S2 & DVB-C/T2) Receiver
Amiko Alien 2 (Spark7162) Dual Boot Receiver
Starsat SR-2000 HD Hyper
6 Feet Eurostar Dish
User avatar
Shahid Geo
Moderator
Moderator
Posts: 9504
Joined: 16 Jun 2013, 9:51 pm
Location: Pakistan
Has thanked: 5878 times
Been thanked: 2774 times
Contact:

Re: Good News! More Progress on PowerVu on Enigma2

#10



Post by Shahid Geo »

:ring:

Image
Special Cccam Server Available
108E-95E-85E-68E-56E-45E-39E-28E-23E-19E-16E-13E-9E-7W-4W-30W-57W
Contact us
+923009093025
Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No User AvatarAhrefs, User avatarBing, User avatarGoogle, No User AvatarSemrush, User avatarYandex and 16 guests