scanning issue with asiasat 3s and hotbird

[moonji54]

No solution I think

[adnan001]

FOR HUM TV KINDLY MINUS 600 FROM HIS ORIGINAL FREQ THEN TUNE IT MANUALLY

[moonji54]

how i can scan manually in Openpli. any screen shot.

[moonji54]

After little search I found it is scanning only vertical frequencies not horizontal. How I can get both even setting are same give above in screen shots

[nice26]

No solution I think

go to menu===> setup===> service searching===> satfinder

@nice26 I have done as u explained to me. Now I that search asiasat3 but hum tv and other are not coming. For geo tv and other channels screen is coming in 3:4 resolution. Kindly solve this issue please

go to menu===>setup===>system===>A/V settings see image below and do same setting as mine







here is my satellite.xml file if you are only using asiasat and hotbird then it is suitable for you i have edited all tps in it h and v all ok.

extract it and ftp in /etc/tuxbox

Code: Select all

http://www.4shared.com/rar/iEm3819rce/satellites.html

[moonji54]

Hello Nice26,

thankx for all, means you did a brilliant job for me. i have twin tuner Xtrend Et9000, on tuner one i have diseqc portA asiasat and portB Hotbird and tuner2: i have Nss6 Dishtv. i flash my receiver last night it crash with green screen even i tried flash twice with latest. hope i am not taking your much time.

[nice26]

Hello Nice26,

thankx for all, means you did a brilliant job for me. i have twin tuner Xtrend Et9000, on tuner one i have diseqc portA asiasat and portB Hotbird and tuner2: i have Nss6 Dishtv. i flash my receiver last night it crash with green screen even i tried flash twice with latest. hope i am not taking your much time.

brother i have dm800hd pvr and using openpli without any error.

use clean image dont install any thing other than pli feed it will not create any problem

[moonji54]

thnaks bro, hope it will help me to resolve my all issues.

[moonji54]

Hello @nice26 i have tried your XML but no channel came, making me little frustrating because if issue with LNB or Sat thanit should not receive on other receiver.

[Rizwan Awan]

You making some mistake on configuring the tuners setting