Page 1 of 1
Dream MiniTV UltraHD
Posted: 22 Dec 2019, 4:23 pm
by sakisvele
New DreamTV Mini UltraHD
New
Dream MiniTV UltraHD info https://dreamtv.app
Re: Dream MiniTV UltraHD
Posted: 22 Dec 2019, 9:59 pm
by sakisvele
The smallest and most powerful Android STB
Android 9
Quad core Amlogic S905X2 Processor
Dual WIFI
2GB RAM
16GB internal memory
4K Resolution (60FPS)
1 USB 3.0 + 1 USB 2.0 ports
SD Card Reader
Other ports: 1 HDMI (2.1), 1 optical, 1 ethernet, 1 service port
https://dreamtv.app
Re: Dream MiniTV UltraHD
Posted: 24 Dec 2019, 1:15 am
by sakisvele
How to flash a Full Image to DreamTV Mini UltraHD
- Open Amlogic USB Burning Tool
Choose the downloaded Full Image IMG file from the menu File -> Open.
Press "Start".
Now turn off the STB.
Disconnect all the cables and press the recovery button (and keep pressed).
Connect a Male-Male USB cable between the PC and the STB (on the USB2 port).
Once the USB Burning Tool has shown the device on the list, release the recovery button.
Re: Dream MiniTV UltraHD
Posted: 24 Dec 2019, 1:16 am
by sakisvele
How to recover a DreamTV Mini UltraHD via USB or SD Card
Recovery instructions for a DreamTV Mini UltraHD via USB or SD Card.
[*]
- Extract the downloaded ZIP file into your USB drive or SD Card.
Turn OFF the decoder.
Insert the USB drive or the SD Card.
Press and hold the recovery button.
Turn ON the STB
When the update procedure appear on the screen release the recovery button.
Re: Dream MiniTV UltraHD
Posted: 24 Dec 2019, 1:20 am
by sakisvele
Amlogic USB Burning Tool
Amlogic USB Burning Tool is a tool for windows operating system, which allows you to flash Stock Firmware on devices powered by Amlogic chipset.
These days, more Android TV boxes are making it easier to update firmware by using FOTA – Firmware Over The Air. But sometimes that’s not an option.
If you only have an .img file, then an OTA firmware upgrade isn’t going to do you much good.
Use the Amlogic USB Burning Tool to install a new firmware image to your device.
Re: Dream MiniTV UltraHD
Posted: 25 Dec 2019, 10:12 pm
by sakisvele