Connect 32 Satellites with Diseqc switch 8x1 & 4x1

User avatar
-=S_SAJJAD=-
Senior Registered Member
Senior Registered Member
Posts: 820
Joined: 03 Sep 2013, 6:12 am
Location: Gujrat, PAK
Has thanked: 56 times
Been thanked: 157 times
Contact:

Connect 32 Satellites with Diseqc switch 8x1 & 4x1

#1



Post by -=S_SAJJAD=- »

Salaam

I will explain that how you can easily connect 32 satellites using disecq switches such as, 4x1 (4 in 1 out) & 8x1 (8 in 1 out)

This is the most only cheapest method available.

If you have up-to 8 satellites only then this setup is useful for you. Otherwise for 1-8 satellites you can use a simple Diseqc swtich 8x1 1.1.



**************​​SIMPLE / SHORT METHOD**************
​​

1. Connect your LNB using a wire (RG6) to diseqc 4x1 to port 1 (LNB 1)

2. Connect another cable from diseqc 4x1 "out / receiver" to diseqc 8x1's port / LNB 1 (as explained in the picture)​​

3. Connect another cable from diseqc 8x1 "tuner" to your STB


​​​​
​​​​
Untitled-2.png




4. Open your STB settings > Menu > setup > tuners & scanning > tuner configuration

This is exactly how you have to configure the settings
x.jpg

This is it.


**************DETAILED METHOD**************​​


1. Connect your 1st LNB using a wire (RG6) to diseqc 4x1 to port 1 (LNB 1) (as explained in the picture)​​​​

2. Connect your 2nd LNB using a wire (RG6) to diseqc 4x1 to port 2 (LNB 2)​​

3. Connect your 3nd LNB using a wire (RG6) to diseqc 4x1 to port 3 (LNB 3)​​​​

4. Connect your 4th LNB using a wire (RG6) to diseqc 4x1 to port 4 (LNB 4)​​​​​

5. Connect another cable from diseqc 4x1 "out / receiver" to diseqc 8x1's port / LNB 1 (as explained in the picture)​​

6. Connect another cable from diseqc 8x1 "tuner" to your STB


​​
2.png

4. Open your STB settings > Menu > setup > tuners & scanning > tuner configuration

This is exactly how you have to configure the settings

1.jpg
​​
2.jpg


if you successfully configured first port (1) of diseqc 8x1 with 4x1 then you can easily configure rest of the ports 1 to 8.

8x4=32
Box: VU+Solo2
Sats: <108E, C_105E, C_100E, 95E, C_91E, 88E, 85E, C_76E, C_68E, 53E,
52E, 42E, C_38E, 36E, 26E, 25E, 21E, 16E, 13E, 9E, 7E, 4W>
Location: Gujrat PAKISTAN

ijaziqbal
Junior Member
Junior Member
Posts: 4
Joined: 21 Dec 2019, 12:25 am
Contact:

Re: Connect 32 Satellites with Diseqc switch 8x1 & 4x1

#2



Post by ijaziqbal »

bUT SIGNAL STRENGTH IS GOING TO LOW IN THIS METHOD , I DID IT

Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No registered users and 11 guests