How to Auto find/add biss keys on Linux receiver

arslantahir1
Registered Member
Registered Member
Posts: 298
Joined: 01 Jan 2016, 11:53 am
Has thanked: 13 times
Been thanked: 118 times
Contact:

How to Auto find/add biss keys on Linux receiver

#1



Post by arslantahir1 »

Salam to all experts

I have Zgemma H9.2S , can some body have any idea on How to Auto find/add biss keys on this Linux receiver
*PAKISTAN ZINDABAD*
raotariq
Registered Member
Registered Member
Posts: 211
Joined: 31 Oct 2013, 7:34 pm
Has thanked: 2 times
Been thanked: 12 times
Contact:

Re: How to Auto find/add biss keys on Linux receiver

#2



Post by raotariq »

Installation Help:

With an FTP tool send the BissFeedAutoKey.tar.gz file to /tmp folder then run these commands in telnet.

(paste each line one at a time, pressing enter after each)

Code
rm -rf /usr/lib/enigma2/python/Plugins/Extensions/BissFeedAutoKey
mkdir /usr/lib/enigma2/python/Plugins/Extensions/BissFeedAutoKey
tar -xzf /tmp/BissFeedAutoKey.tar.gz -C /usr/lib/enigma2/python/Plugins/Extensions/BissFeedAutoKey


Description:

I've written this plugin based on feeds that are reported in sat-universe. After the feed freq is scanned and searched, user can use this plugin. when plugin is up, it shows all feed info that is reported in sat-universe like transponder,id,CW, 4:2:2 or 4:2:0, sport category ,game and somethings else and if you press OK button, The #CW key is inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically if your plugin setting is ok, otherwise user should should restart your softcam manually.



Remote Control Button Help:

OK & Green : #CW key is inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically


BLUE & Yellow: Show Setting Screen

RED & EXIT: EXIT PLUGIN



Option and Tips:

First of all, check plugin setting. Press Blue button and following screen will be displayed:







1. Config folder -> oscam.conf file -> [webif] section -> httpport = 8888

2. Config folder -> oscam.conf file -> [webif] section -> "127.0.0.1" must be in httpallowed section like(httpallowed = 127.0.0.1,192,168.0.0-192.168.255.255)



3- Please disable username and password in webif setting



>>> Please use following config: thanks levi45 oscam.conf



4- After config file setting was changed, softcam must be restarted manually to applying changes.






5.In setting screen, you should select folder of Softcam.key file(Default Folder: etc/tuxbox/config) and press ok button to save changes!

>>>Plugin delete keys that inserted by this plugin every 12 hours!

>>> If #CW not found by plugin, a screen will be displayed that request the CW code of feed or any Biss Encrypted channel!

After pressing ok button, key will be inserted in Softcam.key file and softcam(like oscam,gcam,cccam,ncam or others) is restarted automatically.

>>>when you type CW in box, lowercase or uppercase letters is not important.



>>>If anyone is finding that the keys aren't being deleted from the SoftCamKey file after 12 hrs, change the time setting on your stb from "transponder time" to "ntp".



:dish:>>>Some #CW keys of tv channels are existed, if you want to add your favorite Biss channels, please post full info of it in this thread.(minimum info: Full transponder and #CW)
5a95ef8f60c5558.png
raotariq
Registered Member
Registered Member
Posts: 211
Joined: 31 Oct 2013, 7:34 pm
Has thanked: 2 times
Been thanked: 12 times
Contact:

Re: How to Auto find/add biss keys on Linux receiver

#3



Post by raotariq »

46a0b.png
raotariq
Registered Member
Registered Member
Posts: 211
Joined: 31 Oct 2013, 7:34 pm
Has thanked: 2 times
Been thanked: 12 times
Contact:

Re: How to Auto find/add biss keys on Linux receiver

#4



Post by raotariq »

c7136d8eb24393d16ff.png
raotariq
Registered Member
Registered Member
Posts: 211
Joined: 31 Oct 2013, 7:34 pm
Has thanked: 2 times
Been thanked: 12 times
Contact:

Re: How to Auto find/add biss keys on Linux receiver

#5



Post by raotariq »

f53cd.png
raotariq
Registered Member
Registered Member
Posts: 211
Joined: 31 Oct 2013, 7:34 pm
Has thanked: 2 times
Been thanked: 12 times
Contact:

Re: How to Auto find/add biss keys on Linux receiver

#6



Post by raotariq »

a9b1bde801498f27bf044c5d.png
raotariq
Registered Member
Registered Member
Posts: 211
Joined: 31 Oct 2013, 7:34 pm
Has thanked: 2 times
Been thanked: 12 times
Contact:

Re: How to Auto find/add biss keys on Linux receiver

#7



Post by raotariq »

ead02d64cb6068.png
raotariq
Registered Member
Registered Member
Posts: 211
Joined: 31 Oct 2013, 7:34 pm
Has thanked: 2 times
Been thanked: 12 times
Contact:

Re: How to Auto find/add biss keys on Linux receiver

#9



Post by raotariq »

raotariq
Registered Member
Registered Member
Posts: 211
Joined: 31 Oct 2013, 7:34 pm
Has thanked: 2 times
Been thanked: 12 times
Contact:

Re: How to Auto find/add biss keys on Linux receiver

#10



Post by raotariq »

Version 2.5 works only does not update
Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No registered users and 127 guests