Need experts opinion related diseq switch- Really Urgent Pleazz

[Athart]

20170830_154245.jpg

This is my Current Setting for 9 Lnbs.

Regards.

Receiver se 8-pin Diseq connect kia he ya 4-pin Wala.

[awan71]

20170830_154245.jpg

This is my Current Setting for 9 Lnbs.

Regards.

Receiver se 8-pin Diseq connect kia he ya 4-pin Wala.

8 Pin DiSEq connected to Receiver.

[adnan_85]

Thanks you so much all .... I have done it with the help of you experts .

Lets conclude ..For multiple LNB we can't use 4X1 so we must need a 8X1 switch and all other 4X1switches connect to this ...


Thanks All

[kazuya1]

janab mera sawal ya hai,,,, k Dis 4 x1 pen ko dis 8.1 mein laga dia jesa ap ny bataya ... wesy karny k baad .....

For lnb 1 k lia Disq =A and Dis1.1 = 4 ok ab lnb 2 or three and four k lia b same seting required hu gi in receiver ?

or ager blind scan karny sy sab garbar nhi hu jy gi ?

[chazer]

janab mera sawal ya hai,,,, k Dis 4 x1 pen ko dis 8.1 mein laga dia jesa ap ny bataya ... wesy karny k baad .....

For lnb 1 k lia Disq =A and Dis1.1 = 4 ok ab lnb 2 or three and four k lia b same seting required hu gi in receiver ?

or ager blind scan karny sy sab garbar nhi hu jy gi ?

Yes, for Diseqc 1.0 [Diseqc 4pin] LNB2 , LNB3 and LNB4 you use same setting for Diseqc 1.1[Diseqc 8pin] witch is 4 in your case and secondly it has no conflict with blind scan.

[kazuya1]

ok thank i will try .

[kazuya1]

receiver setting ok .. thankx for sharing this method

[kazuya1]

Yes it works this way I am using one 8 pin and second 4 pin disque switch to view 10 satellites, 1st 4ft Dish with105e-Cband, 100e-Kuband, 95e Kuband, 88e-Kuband & Abs2a @ 74.5e Kuband, 2nd 2ft dish with 52e Yahsat, 42e Turksat, and 36e Eutelsat 36b all Kuband and 3rd Dish old 8ft Mesh with Paksat 38e Cband centre & 49e Yamal 202 Cband

please share your loction?