A technical issue ,help needed @chazer !!!
- Masood
- Vip
- Posts: 3461
- Joined: 17 Jan 2015, 4:19 pm
- Location: Lahore
- Has thanked: 799 times
- Been thanked: 1070 times
- Contact:
A technical issue ,help needed @chazer !!!
my sony lcd works with sine wave/modified sine waves out put and its connection is routed thru my square waves output /local manufactured UPS.
some times during switching (routed through UPS) in ON/OFF mode ,LCD flickers for a friction of second.
I made a separate connection for LCD power input (out of UPS route) hence it didn't work.
kindly suggest me a solution.
thanks a lot.
some times during switching (routed through UPS) in ON/OFF mode ,LCD flickers for a friction of second.
I made a separate connection for LCD power input (out of UPS route) hence it didn't work.
kindly suggest me a solution.
thanks a lot.
DM 900 UltraHD
800HDse SIM2.10
OpenBox AS4K CI Pro
800HDse SIM2.10
OpenBox AS4K CI Pro
- Masood
- Vip
- Posts: 3461
- Joined: 17 Jan 2015, 4:19 pm
- Location: Lahore
- Has thanked: 799 times
- Been thanked: 1070 times
- Contact:
Re: A technical issue ,help needed @chazer !!!
I forgot to mention ,the issue reports in presence of WAPDA electricity.
DM 900 UltraHD
800HDse SIM2.10
OpenBox AS4K CI Pro
800HDse SIM2.10
OpenBox AS4K CI Pro
Re: A technical issue ,help needed @chazer !!!
Please kindly mention the time when lcd flickers, i mean when ups turns on after the line gone or when line comes and ups is going to charging mode.
Regards.
Regards.
- Masood
- Vip
- Posts: 3461
- Joined: 17 Jan 2015, 4:19 pm
- Location: Lahore
- Has thanked: 799 times
- Been thanked: 1070 times
- Contact:
Re: A technical issue ,help needed @chazer !!!
Thanks dear chazer for kind responsechazer wrote:after the line gone
LCD doesn't work after the line gone ,it happens occasionally NOT all the time ..may be due to decrease in voltage but not sure.
I observe the variation while switching any button in OFF/ON mode not only with LCD if an energy saver is ON ,a little flicker can be observed thru energy saver.
all phenomena occurs when the battery is fully charged and NO charging is carrying on.
DM 900 UltraHD
800HDse SIM2.10
OpenBox AS4K CI Pro
800HDse SIM2.10
OpenBox AS4K CI Pro
Re: A technical issue ,help needed @chazer !!!
It seams that lcd picks some kind of interference through it's input sources. What about when you watch something through usb ,does it fliks ??Masood wrote:I observe the variation while switching any button in OFF/ON mode not only with LCD if an energy saver is ON
Regards.
- Masood
- Vip
- Posts: 3461
- Joined: 17 Jan 2015, 4:19 pm
- Location: Lahore
- Has thanked: 799 times
- Been thanked: 1070 times
- Contact:
Re: A technical issue ,help needed @chazer !!!
yea it is sure ,LCD picks interference and only we need to sort out that kind of interferencechazer wrote:It seams that lcd picks some kind of interference through it's input sources. What about when you watch something through usb ,does it fliks
I didn't do any practice yet ,watching something thru USB.
thanks once again for sparing time
DM 900 UltraHD
800HDse SIM2.10
OpenBox AS4K CI Pro
800HDse SIM2.10
OpenBox AS4K CI Pro
- Masood
- Vip
- Posts: 3461
- Joined: 17 Jan 2015, 4:19 pm
- Location: Lahore
- Has thanked: 799 times
- Been thanked: 1070 times
- Contact:
Re: A technical issue ,help needed @chazer !!!
OH sorry I didn't know you were waiting for such kind of observationchazer wrote:So haven't you checked yet with USB ??
BTW I don't have same issue since last many days ,might be line's voltage losses have been recovered by LESCO
anyhow I'm thankful to you for your kind efforts
DM 900 UltraHD
800HDse SIM2.10
OpenBox AS4K CI Pro
800HDse SIM2.10
OpenBox AS4K CI Pro
- Masood
- Vip
- Posts: 3461
- Joined: 17 Jan 2015, 4:19 pm
- Location: Lahore
- Has thanked: 799 times
- Been thanked: 1070 times
- Contact:
Re: A technical issue ,help needed @chazer !!!
yes the problem has gone till voltage dropchazer wrote:so problem solved
I had managed a servo motor stabilizer (ST500WS model of STAC company) to solve my issue but one responsible member of the board awared me by using such device consuming 500 WATTS out of 1000 Watts UPS so I accepted his genuine proposal otherwise I would destroy my UPS
DM 900 UltraHD
800HDse SIM2.10
OpenBox AS4K CI Pro
800HDse SIM2.10
OpenBox AS4K CI Pro
Who is online
Users browsing this forum: No registered users and 166 guests