How to flash Vu+ Solo with USB Pen Drive

User avatar
taree
Senior Registered Member
Senior Registered Member
Posts: 894
Joined: 01 Aug 2013, 3:32 pm
Has thanked: 686 times
Been thanked: 417 times
Contact:

How to flash Vu+ Solo with USB Pen Drive

#1



Post by taree »

How to flash Vu+ Solo with USB Pen Drive
When you download a new USB image file you may find the folder names in the ZIP/RAR archive are incorrectly labeled.

So what you need to do is make a folder on your USB pen drive called vuplus

Then inside the vuplus folder you make another folder called solo

So now you should have a folder in on your PEN drive root like this

vuplus/solo

Copy the following USB Image files from the ZIP/RAR achive to the vuplus/solo folder on your PEN Drive.

boot_cfe_auto.jffs2
kernel_cfe_auto.bin
root_cfe_auto.jffs2

Power Off Solo
Insert USB Pen Drive in the front USB socket.
Power on Solo

The display window will show an orange/red LED constantly lit.
This means it's reading the data from the USB Pen into the buffer.

Then...

The display window will show the orange/red LED flashing.
This means it's now flashing the data to the receiver.

Wait until the LED changes to a Green Flashing LED.

When Green LED is flashing you can now safely power off the receiver and remove the USB Pen Drive.

Now Power on and wait for the receiver to boot.
VU ZERO 4K
WETEKPLAY2
SAMSUNG 40K5000
-==Nawazish==-
Registered Member
Registered Member
Posts: 346
Joined: 21 Jun 2013, 1:02 pm
Location: PAKPATTAN-PAKISTAN
Has thanked: 1 time
Contact:

Re: How to flash Vu+ Solo with USB Pen Drive

#2



Post by -==Nawazish==- »

Excellent help full post.

thank you so much.



:rock:
Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No User AvatarDot, User avatarGoogle Adsense, User avatartiger and 218 guests