Golden Advanced Search
Last visit was: less than a minute ago It is currently 20 Feb 2017, 11:04 pm
       

All times are UTC + 5 hours




 [ 1 post ] 
Author Message
PostPosted: 11 Jan 2017, 9:25 am •  Post # 1
Offline
ACTIVE MEMBER
ACTIVE MEMBER
User avatar

Joined: 01 Aug 2013, 3:32 pm
Posts: 256
Has thanked: 403 times
Been thanked: 552 times
method one====
========================
First try using windows Disk manager to show partitions and to delete/repartition and reformat the usb drive.

Unfortanutly this may not work and you will need
A) a third partitioning disk utility, or
B) What I use. use windows cmd line diskpart cmd to remove it (what I had to do for a thumbdrive used on a Mac)
.. If diskpart is what you want to use, be cautious and make SURE it is pointing to the USB drive.
Basically (read this first):
http://technet.microsoft.com/en-us/libr ... 65(v=ws.10).aspx

.. You open a dos command window WITH run with admistrator privlage. then type the following cmds.
- Diskpart Starts program Do Not type the - (ie diskpart> List disk then enter key)
- LIST DISK (shows all disk, look for Disk Number of the Drive (Your USB drive)
- SELECT DISK X (For X insert USB drive Number)
- DETAIL DISK (Detailed information of the disk that has the focus This will show if you have selected the correct drive.)
- CLEAN (One of the most practical and most dangerous: it removes at once all the partitions on the selected disk.)
Note for the next two do NOT use the size=n)
- CREATE PARTITION EXTENDED (Creates an extended partition on the current drive. After the partition has been created, the focus automatically shifts to the new partition.)
- CREATE PARTITION LOGICAL (Creates a logical drive in the extended partition. After the partition has been created, the focus automatically shifts to the new logical drive.)
- EXIT (Quits DISKPART and returns to the command prompt classic)

You should now be able to format the drive (WITH the correct space) using windows
===========================
2nd method---
===========================
there are very few stebs all those are just making it so difficult flow these steps:-
1)go to start
2)type"cmd"
3)type"diskpart"
then write all these comands
list disk
select disk 1(replace 1 with your disk,u can check your disk by checking the size of your disk in "list disk")
clean
create partition primary
format fs=NTFS
exit


Its Done!! :wahoo:

_________________
DREAMBOX 800 SE WITH MMBOOT
DREAMBOX500s
neosat9800i
startrack55x


Top
 Profile Send private message  
 
 [ 1 post ] 

All times are UTC + 5 hours


Who Is Online

Users browsing this forum: No registered users and 1 guest


   Similar Topics   Author   Replies   Views   Last Post 
There are no new unread posts for this topic. HOW TO FIX FLASH BAD SECTOR(SOLVED)

[ Go to page: 1, 2 ]

in DREAMBOX TUTORIALS

taree

15

299

08 Oct 2015, 5:32 pm

ramzan822 View the latest post

There are no new unread posts for this topic. How to flash Vu+ Solo with USB Pen Drive

in VU PLUS TUTORIALS

taree

1

153

04 Sep 2013, 9:01 am

-==Nawazish==- View the latest post

There are no new unread posts for this topic. Attachment(s) How To FIX_Repair A Corrupted USB Flash Drive-SD Card-Urdu

in COMPUTERS

Golden

1

145

27 Sep 2016, 10:19 am

Arshad Niazi View the latest post

There are no new unread posts for this topic. Repair USB U3S MP 2.099 (Repair USB Flash Drive)

in COMPUTERS

Balios13

0

23

02 Sep 2015, 2:09 pm

Balios13 View the latest post

There are no new unread posts for this topic. ALL FLASH FILES ALL FLASH IC SUPPORT

in HARDWARE & TECHNICAL SOLUTIONS

KD-KOT

0

82

03 Sep 2016, 10:31 am

KD-KOT View the latest post


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Valid XHTML 1.0 Transitional
News News Site map Site map SitemapIndex SitemapIndex RSS Feed RSS Feed Channel list Channel list
Powered by phpBB® Forum Software © phpBB Group

phpBB SEO